Contents

The Basics
contents
getting to know your equalizer	3
features	4
back of equalizer	6
front of equalizer	8
important safety instructions (UL 6500) 9
before you begin	13
connecting your equalizer	14
connecting input sources	14
connecting output sources	14
connecting REC output	15
using the ground lift switch	15
using your equalizer	16
replacing the fuse	17
caring for your equalizer	18
FAQs	18
product speciﬁcations	19

	CAUTION
	CAUTION		WARNING: To reduce the
RISK OF ELECTRIC SHOCK			risk of ﬁ re or shock hazard,
RISK OF ELECTRIC SHOCK		!	do not expose this product
	DO NOT OPEN		do not expose this product
	DO NOT OPEN		to rain or moisture
			to rain or moisture

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

THE COVER OR BACK. NO USER-SERICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED PERSONNEL.

The lightning symbol is intended to alert you to the presence of uninsulated, dangerous voltage within this product’s enclosure that might be of sufﬁcient magnitude to constitute a risk of electric shock. Do not open the product’s case.

The exclamation symbol is intended to inform you that

!important operating and maintenace instructions are included in the literature accompanhing this product.

The Basics

getting to know your equalizer

Your new equalizer can enhance your sound system in the following ways:

•Remedy any system suffering from rumble or low frequency below 30Hz overload by attenuating the lowermost equalizer controls so that you will not miss any of the music.

•Eliminate or reduce noise due to scratches on record surfaces or even the hiss on a tape by bringing down the control level at 9 kHz. You can even compensate for the boosted highs on Dolby processed tape or encoded FM Broadcasts.

•Equalize the tonal quality of broadcast stations if they attenuate or accentuate either highs or lows.

•Adjust the controls to accommodate high performance recording tapes that require special equalization in playback.

•Correct turntable cartridge or speaker inadequacies for pleasant listening.

•Find the appropriate equalizer control and adjust it up or down a few dB.

•Adjust the equalizer to accommodate voices or music.

32-2059 specifications

The Radio Shack 32-2059 is a versatile and compact digital multimeter known for its reliability and accuracy in various electrical measurements. As a valuable tool for electronics enthusiasts and professionals alike, it delivers essential features that cater to a wide range of testing and analysis needs.

One of the standout characteristics of the 32-2059 is its user-friendly interface, which includes a large, easy-to-read LCD display. This feature allows users to view measurement readings clearly, making it suitable for both novice and experienced technicians. The multimeter offers a variety of measurement functions, including DC and AC voltage, current measurement, resistance, and continuity testing. With the ability to measure up to 1000 volts AC and DC, the 32-2059 is equipped to handle a wide range of electrical testing scenarios.

The multimeter is powered by a standard 9-volt battery, ensuring long-lasting performance for extended use. It also features an auto-off function that helps to conserve battery life when the device is not in use. Additionally, the 32-2059 incorporates safety features such as overload protection, which safeguards both the user and the device during testing operations.

Another significant aspect of the Radio Shack 32-2059 is its compact design, making it highly portable and convenient for fieldwork. Whether working in tight spaces or on DIY electronics projects, this multimeter can easily be carried and stored. The durable casing also ensures that it can withstand the rigors of regular use.

For enhanced functionality, the 32-2059 includes a diode testing mode, which allows users to check diodes and perform basic transistor testing. This versatility adds to its appeal as an all-in-one testing solution for hobbyists and professionals.

In summary, the Radio Shack 32-2059 digital multimeter is characterized by its accuracy, user-friendly interface, and a wide range of measurement capabilities. Its portability, safety features, and versatile testing modes make it an ideal choice for anyone working with electronics, whether in a professional setting or as a hobby. This multimeter continues to be a trusted tool for electrical measurement due to its dependable performance and ease of use.

32-2059 specifications