Using your equalizer, Replacing the fuse

The Basics

using your equalizer

1.Set the volume on the output devices (receiver, ampliﬁer, or tape deck) to minimum and turn them on.

2.Turn on the equalizer. The red power LED indicator lights up.

3.Set the IN/OUT switch to IN to activate the equalizer. The red LED indicator lights up.

IN/OUT

Switch

•If you set the IN/OUT switch to out, the input signal is bypassed and routed directly to the other sound system’s output jacks. The red LED indicator goes off.

•To operate left channel IN/OUT, use the IN/OUT switch on the left. To operate right channel IN/OUT, use the IN/OUT switch on the right,

4.Adjust some or all of the ﬁfteen (15) equalizer controls ranging from 25 Hz to 16 kHz for each channel to get the desired frequency output. Each equalizer control adjustment can be cut or boosted up to ±12dB.

Equalizer

Controls

5.To insert an electronic ﬁlter into the equalizer’s signal path, press LOW CUT to cut the low frequencies. The red LOW CUT LED lights up.

LOW CUT

Switch

The Basics

6.It is possible that at certain settings, the frequency equalization slide controls will increase or decrease the total average signal level. Use the left and right LEVEL controls to adjust each channel so the average output equals the input signal level.

LEVEL

Control

Each LEVEL control has four output level LED NOTE indicators that light up to reﬂect the output level

from -10dB to +6dB. The +6 dB LED lights up to warn you that there is too much output power and distortion. Lower the LEVEL control until this LED goes off.

replacing the fuse

Your equalizer requires a 250 Volt, 0.5 Amp fuse to protect it from power surges and short circuits. If the equalizer suddenly turns off or will not turn on, the fuse could be blown. Replace the fuse with a 0.5 Amp, 250 Volt, fast-blow, 1¼ x ¼ inch (32 mm x 6.35 mm) fuse (not supplied, available at RadioShack or online at www.radioshack.com).

Follow these steps to replace the fuse.

1.Remove the fuse compartment cap on the back of the equalizer.

Fuse

Compartment

Cap

2.Remove the old fuse and replace it with an identical fuse.

3.Replace the fuse compartment cap.

NOTE	Never use a fuse of a different type or rating.

32-2059 specifications

The Radio Shack 32-2059 is a versatile and compact digital multimeter known for its reliability and accuracy in various electrical measurements. As a valuable tool for electronics enthusiasts and professionals alike, it delivers essential features that cater to a wide range of testing and analysis needs.

One of the standout characteristics of the 32-2059 is its user-friendly interface, which includes a large, easy-to-read LCD display. This feature allows users to view measurement readings clearly, making it suitable for both novice and experienced technicians. The multimeter offers a variety of measurement functions, including DC and AC voltage, current measurement, resistance, and continuity testing. With the ability to measure up to 1000 volts AC and DC, the 32-2059 is equipped to handle a wide range of electrical testing scenarios.

The multimeter is powered by a standard 9-volt battery, ensuring long-lasting performance for extended use. It also features an auto-off function that helps to conserve battery life when the device is not in use. Additionally, the 32-2059 incorporates safety features such as overload protection, which safeguards both the user and the device during testing operations.

Another significant aspect of the Radio Shack 32-2059 is its compact design, making it highly portable and convenient for fieldwork. Whether working in tight spaces or on DIY electronics projects, this multimeter can easily be carried and stored. The durable casing also ensures that it can withstand the rigors of regular use.

For enhanced functionality, the 32-2059 includes a diode testing mode, which allows users to check diodes and perform basic transistor testing. This versatility adds to its appeal as an all-in-one testing solution for hobbyists and professionals.

In summary, the Radio Shack 32-2059 digital multimeter is characterized by its accuracy, user-friendly interface, and a wide range of measurement capabilities. Its portability, safety features, and versatile testing modes make it an ideal choice for anyone working with electronics, whether in a professional setting or as a hobby. This multimeter continues to be a trusted tool for electrical measurement due to its dependable performance and ease of use.