Radio Shack 32-2059 quick start Connecting your equalizer, Connecting input sources

The Basics

connecting your equalizer

connecting input sources

Connect line level inputs (i.e.: tuners, CD players, etc.) to the INPUT jacks on the back of your equalizer through either stereo phono audio cables or ¼" (6.35 mm) audio cables.

Stereo Phono	¼” Input
Audio Input
	Jacks
Jacks

NOTE Use only one type of cable at a time.

connecting output sources

To play the equalizer's output signal through your sound system for events such as parties, dances, conferences, etc., connect either stereo phono, ¼" (6.35 mm), or XLR audio cables to the equalizer’s OUTPUT jacks and to your amplifier's input jacks.

Stereo Phono	XLR Output
Audio Output	Jacks
Jacks
¼” Output
Jacks

NOTES • Use only one type of audio cable at a time.

•You can use the equalizer as a sound effect device for a mixer, by connecting the mixer’s SEND jack to the equalizer's INPUT, and playing back through the equalizer's output to the mixer’s RECEIVE jack.

The Basics

connecting REC output

You can record the equalizer's output signal by connecting the left and right cables from the equalizer’s REC OUTPUT to the input of a recorder.

REC

OUTPUT

using the ground lift switch

1.Move the GROUND LIFT switch to the ground position. Turn on the equalizer and listen to the sound system with no signal present.

GROUND

LIFT Switch

2.Turn off the equalizer and move the GROUND LIFT switch to the LIFT position.

3.Turn on the equalizer again. Listen to determine which switch position provides a background noise or hum in your sound system.

4.Keep the switch in the ground position if the noise level remains the same in either position. Keep the switch in the LIFT position if the equalizer provides a signal free of background noise and hum.

14 15