S T E P 1
S T E P 1 ORANGE BAG
•Install the rear foot with the four lock washers (M8), two inside screws (M8x65L), and two outside screws (M8x20L). Tighten with the 5mm Allen wrench.
Rear Foot
S T E P 2
S T E P 2
Console Mast
Console Mast
Boot
Frame
Bracket
BLUE BAG
•Slide the console mast boot onto the console mast.
•Unfold the wire harness and heart rate wires located in the console mast frame bracket. Attach the wire tie coming from the bottom of the console mast to the wire harness and heart rate wires. Pull the wire tie with wire harness and heart rate wires up through the top of the console mast while simultaneously sliding the mast into the frame bracket.
•Secure the console mast to the frame bracket with six lock washers (M8) and six screws (M8x15L). Tighten with the 5mm Allen wrench. Place the seventh screw (M8x15L) in the rear of the frame bracket and tighten until snug.
•Slide the console mast boot down and snap it into place on the side cover.
5