Cateye Essential Guide to Safe Operations and Maintenance for Your Bicycle Accessories
Page 5

FOR SAFE OPERATIONS (IMPORTANT)

For safe and appropriate use, always observe the following.

E

 

Caution:

•Don't pay too much attention to your cyclocomputer functions when riding. Keep your eyes on the road and give due consideration to safe riding.

•This altimeter is not intended to be a specialized measuring device.

Proper use and care:

•Never disassemble the main unit. It can not be re-assembled.

•The main unit is loaded with sensitive components. A strong impact may result in malfunction. Don't intentionally submerge the main unit under water. Although the main unit is water-resistant (such as rain), it is not designed to be used underwater.

•Don't leave the main unit exposed to direct sunlight for extended periods of time.

•If the main unit is superheated by direct sunlight, the temperature sensor inside of the main unit will not give the correct tempera- ture.

•The Cat Eye CC-AT100 is essentially a barometer. It measures the change in barometric pressure whether caused by a change in altitude or a change in weather.

•The current altitude should be calibrated before each ride.

•Sudden temperature change can cause a temporary incorrect altitude display.

•When using this unit as an independent altimeter, switch off the bicycle symbol to allow it in the continuous measuring mode.

•Static electricity might cause incorrect data.

•If the S/S(Start/Stop) button, Mode button and Set button are pressed simultaneously, all the stored data will be erased.

•In an aircraft, the unit will not give a correct data because of the regulated pressure.

Maintenance:

•When the main unit or the contact gets wet, dry it off with a cloth; rust will cause functional errors.

•Fasten the magnet and the speed sensor securely, and check their relative position periodically. Incorrect attachment of these parts may cause an accident.

•If the altitude sensor cover is clogged with mud or sand, it will stop measuring accurately. Clean it off according to "Daily Care" instructions.

•If the main unit or accessories/attachments become dirty with mud etc., gently wash with mild soap and wipe dry with a soft cloth. Never apply paint thinner, benzine or alcohol; damage will result.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Meter With Altimeter FunctionAltimeter Functions IntroductionCyclocomputer Functions Aspects of Main UnitIndex Main Unit Accessories/AttachmentsNames Never disassemble the main unit. It can not be re-assembled For Safe Operations ImportantMain Unit Preparation SET UPHow to Put in a Battery Button Functions Main Mode SUB Mode Altimeter Function HOW to USE AS AN AltimeterReset Continuous Measuring Mode Bicycle Symbol off Cycling Mode Bicycle Symbol on FigHow to Switch on/off the Bicycle Symbol How to Correct the Current AltitudeMounting to Bicycle HOW to USE AS a CyclocomputerHow to Correct the Altitude Auto Automatic Start/Stop Function How to Switch on/off Auto FunctionMounting Main Unit TestCurrent Altitude Above Sea Level Main Mode Power Saving FunctionElapsed Time Main Mode Measuring and DisplayTrip Distance Main Mode Average Speed Main ModeTrip Altitude Gain Sub Mode X1000 Total Altitude Gain Sub ModeMaximum Speed Sub Mode TroubleshootingTemperature Sub Mode Total Distance Sub ModePage Daily Care Spare AccessoriesSpecifications Limited Warranty Setting Values Cross Reference TableYear Warranty Only Main Unit excluding battery Address for service
Related manuals
Manual 20 pages 24.42 Kb

CC-AT100 specifications

The Cateye CC-AT100 is a remarkable cycling accessory designed for enthusiasts and serious cyclists alike. This device stands out due to its multifunctionality, compact design, and user-friendly interface, making it an essential tool for cyclists of all levels.

One of the main features of the CC-AT100 is its comprehensive display screen, which provides a wealth of information at a glance. Cyclists can easily track essential metrics such as speed, distance, trip time, and total distance, allowing for an accurate assessment of performance during rides. The display is illuminated, ensuring visibility in low-light conditions, enhancing safety and usability.

Additionally, the CC-AT100 leverages advanced sensor technology to monitor accurate data. The device is equipped with a wireless function that transmits data without cumbersome cables, ensuring a clean and clutter-free installation on the bike. This wireless technology ensures that cyclists can enjoy uninterrupted performance without the risk of snagging cables during rides.

Another noteworthy aspect of the CC-AT100 is its ability to store and analyze past rides. This feature is particularly appreciated by serious cyclists who want to track their progress over time. By analyzing data from previous rides, users can identify trends, make informed adjustments to their training regimes, and set personal goals.

Durability is a key characteristic of the Cateye CC-AT100. Designed to withstand various weather conditions, it is both water-resistant and built to endure the rigors of outdoor cycling. This reliability ensures that the device performs exceptionally well in diverse environments, whether it's sunny, rainy, or windy.

User-friendliness is a priority with the CC-AT100, featuring intuitive controls that make it easy to navigate through the menu and access data. Setting up the device is straightforward, with clear instructions provided for installation and calibration.

In conclusion, the Cateye CC-AT100 is an exceptional cycling tool that combines advanced technology with user-centric design. Its comprehensive metrics, wireless functionality, and durability make it a perfect companion for any cyclist looking to enhance their riding experience and monitor their performance effectively. Whether you are a casual rider or a seasoned athlete, the CC-AT100 offers valuable insights and ease of use, proving to be an indispensable addition to your cycling gear.
Top Page Image Contents