nWhen your correct weight has been entered, press the 
key to accept the displayed value.
5.You are prompted to enter a time goal. The trainer displays a default time of 99 minutes. You may enter any time from 1 to 99 minutes.
nUse the 
keys to enter your desired time goal; or press the 
or 
key, as necessary, to increase or decrease the displayed value in 1 minute increments.
nWhen your desired goal has been entered, press the 
key to accept the displayed value.
6.You are prompted to enter your age.
nUse the 
keys to enter your age, or press the 
or 
key, as necessary, to increase or decrease the displayed value in 1 year increments.
nWhen your correct age has been entered, press the 
key to accept the displayed value.
7.If desired, you can use the personal fan during your workout (see “Using the Personal Fan” for details).
8.If you wish to pause the program, stop striding. The trainer enters pause mode and a “P” flashes in the TIME Window. Resume striding within 25 seconds to continue your workout.
9.When you have reached your workout goal, the trainer enters the Cooldown cycle (see “Cooldown Cycle” for details). If you wish to exit the program before you have reached your workout goal, stop striding and allow the Pause timer to expire.
FITNESS TEST
The FITNESS TEST performs a
NOTE: The test information is invalid if the SPM is not maintained at approximately 60 RPM.
You are required to raise your heart rate between 120 and 170 BPM for minutes 5, 6 and 7 (optional minute determined by the program). If, during the test, your heart rate reading levels out increase the difficulty LEVEL, but DO NOT change the speed at which you are striding.
The Fitness Test utilizes age, gender, weight, workload output and HR to calculate two values:
nMax VO2 (in m/O2/Kg/min) - measurement of oxygen consumption, which is used to define aerobic fitness.
nFitness Level - allows a user to track progress on a scale from 0% to 100%.
NOTE: You must wear the heart rate strap during the Fitness Test to monitor your heart rate.
To operate the Fitness Test program:
1.Access the trainer and begin striding.
n If necessary, enter the Lockout ID to enable the trainer for operation (see “Lockout ID Processing” for details).
2.Press the 
key.
3.You are prompted to select the desired ADVANCED WORKOUTS program. Press the 
key when prompted to select the
FITNESS TEST.
4.You are prompted to enter your weight. The trainer displays a default weight of 155 pounds (70 kg). You may enter any weight from 0 to 500 pounds (0 to 226 kg).
n Use the 
keys to enter your current weight; or press the 
or 
key, as necessary, to increase or decrease the displayed weight in 1 pound (or 1 kg) increments.
n When your correct weight has been entered, press the 
key to accept the displayed value.
5.You are prompted to enter your gender.
n Press the 
key to set the gender to “male”, press the 
key to set the gender to “female”.
n When your correct gender has been entered, press the 
key to accept the displayed value.
22 | STAR TRAC |