Belt Lubrication
Your LifeSpan treadmill belt should be lubricated every 3 months of regular use or every 40 hours of use.
Use only 100% Silicon and avoid using aerosol silicon sprays that include additives and petroleum distillates. One ounce of silicon should be used for each application. LifeSpan offers 100% silicon lubricant that can be ordered at www.LifeSpanFitness.com or from 801.973.9993
When applying the silicon either apply it directly to the deck surface or to the back of the running belt. This may be accomplished by folding the treadmill and applying the silicon to the back of the belt from each back corner. Spray the silicon down and across the belt from each corner. Rotate the belt 1/2 of the circumference and repeat from each corner.
Note: When lubricating the belt, make sure that the treadmill is located on a surface
that can be easily cleaned. After lubricating your treadmill, clean off excess silicon from the belt and frame.
Cleaning
After use, wipe down your treadmill with a soft cloth. On a regular basis, you will also want to clean the treadmill using a mild detergent to remove all dirt and salt from the belt, painted parts and the display.
Avoid getting dirt and other materials on the belt as these materials can work their way under the belt and damage your treadmill or cause components to wear prematurely.
23