Keys Fitness HT601 owner manual Treadmill Error Messages

Page 17

17Error Messages

Treadmill Error Messages.

Your treadmill is equipped with a software package that enables error messages to be displayed when there is a problem. The following error codes will be displayed in the console display win- dows.

Safety Interlock Error Messages

SI 1 - Safety key missing, replace and try again.

SI 2 - Over voltage protection trip. Notify Keys Fitness Technical Service.

SI 3 - Tilt Switch Trip. Notify Keys Fitness Technical Service.

Other Error Messages

E11 - Lack of speed feedback data from belt motor. Attempt re-calibration. See Calibration Sequence section for detailed information.

E22 - Under Speed condition detected from the belt motor. Attempt re-calibration. See Calibration Sequence section for detailed information.

E33 - Over Speed condition detected from the belt motor. Attempt re-calibration. See Calibration Sequence section for detailed information.

To avoid possible damage to the treadmill and the possibility of injury, do not operate the treadmill until the problem is corrected. Call Keys Technical Service at (888) 340-0482.

Image 17
Contents Healther Trainer 601 Treadmill Table of Contents HT601 Specification SheetSafety Precautions and Tips Important Safety InformationBefore You Start Warm Up Exercises Assembly Assembly InstructionsPower Requirements Console Functions and Descriptions Program and Operating Instructions Quick Start / Manual ModeProgram Mode Program Profiles Walking Belt is Slipping During USE Diagram Belt Adjustment and TensionChange Miles per hour to Kilometers per hour Cleaning Maintenance InstructionsTreadmill will not start Troubleshooting GuideTreadmill Error Messages Error MessagesCalibration Sequence HT601 Parts & DiagramsKEYSFITNESSPRODUCTS,LP-LIMITEDWARRANTY