Assembly
4.Attach the top rail to the left and right uprights using two Allen Bolts M5*15 (# 26) and two Arc Washers (#41).
You may now firmly tighten all hardware. Refer to Figure 4.
Note: Be careful not to pinch the wire har-
ness.
Figure 4: Top Rail Assembly
CONSOLE
5. Remove the four M5*20mm screws from the back of the console. Set aside. Connect Console Wire Harness being careful not to pinch the wires.
Using four screws previously removed from console, attach console to the Top Rail. Refer to Figure 5.
Figure 5: Console Wire Connections
CONGRATULATIONS!!!!!!!!
You have completed the assembly of your HealthTrainer 403T Treadmill.
7