Keys Fitness 7.3t owner manual Assembly, Main Components

Page 5

Assembly

The Triumph 7.3t Treadmill will require assembly before operating. After opening the box, remove any packing material from the treadmill.

Do not throw away any packing materials until the unit is working properly.

Place the base on a clean, level surface. Make sure the electrical cord will easily reach an electrical outlet.

Locate the hardware pack and identify the following parts required for assembly.

Tools:

1.Allen Wrench- 3/16”

2.Allen Wrench- 7/32”

3.Philip Screwdriver

Main Components:

1.Owner’s Manual

2.Console Assembly

3.Left and Right Uprights

4.Left and Right Fender

5.Left and Right Bottom Handle Cover

6.Handle End Caps

7.Deck Assembly

8.Long Bumpers

Hardware:

1.Washer 9*16*1.6 mm (Qty. 12)

2.Spring Washer 8 mm (Qty. 12)

3.Allen Bolt 5/16”-18 x 70 (Qty. 4)

4.Allen Bolt 5/16”-18 x 15 (Qty. 6)

5.Allen Bolt M8*30 (Qty. 2)

6.Shoulder Allen Bolt 5/16”-18 x 45 (Qty. 2)

7.Philip Screw ST4.2*16 (Qty. 8)

Wire Connections:

1.Console Harness

2.EKG Harness

5

Image 5
Contents Triumph 7.3t Treadmill Table of Contents Safety Precautions and Tips Important Safety InformationBefore You Start Main Components AssemblyConsole Harness Location IMPORTANT, Please Note Left and Right Bottom Handle Cover Installation Left and Right Fender Installation Exercise Guidelines Warm Up ExercisesMoving Instructions Power Requirements Time / Pace Window Console Panel FunctionsProgram and Operation Quick Start / Manual ModeEnter Program UP / Down Power Program Profiles Belt Adjustment Change MPH to KMH To Apply Lubricant to the Walking Board Maintenance InstructionsTreadmill will not start Troubleshooting GuideTreadmill Error Messages Error MessagesCalibration Sequence Triumph 7.3t Treadmill Parts List Rev D Parts ListREF# Keys PART# Description QTY Exploded View Console Assembly Wire Harness Please Consult Your Physician Before Using this Product Warranty Information888