Assembly
Assembly requires the included allen wrench and phillips screwdriver.
Do not plug in the power cord until all assembly steps are completed.
1. With the treadmill deck in the down |
| |
position, leave the unit on the original |
| |
packing material to assemble all parts. |
| |
2. Connect the console harness together. |
| |
One side of harness is located near the |
| |
motor cover on the bottom left side. The |
| |
other end is located inside the Left |
| |
Upright assembly. See Figure 1 and 2. | CONSOLE | |
| HARNESS | |
3. Pull the wiring harness from top of |
| |
upright tube making sure harness connec- |
| |
tors are pulled into large hole at bottom | Figure 1: Console Harness Location | |
of upright. | ||
| ||
Caution: |
| |
Make sure harness is installed inside the upright and pay attention not to pinch the wire harness. | ||
Figure 2: Console Harness Connection
6