Trouble-Shooting

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge protector, and that the surge protector is plugged into a properly grounded outlet. (See HOW TO PLUG IN THE POWER CORD on page 7.) Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length

b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.

c. Check the circuit breaker located on the treadmill near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

d. Check the on/off switch located on the treadmill near the power cord. The switch must be in the on position.

PROBLEM: The power turns off during use

c
Tripped	Reset
d	On
	On
	Position

SOLUTION: a. Check the circuit breaker located on the treadmill near the power cord (see c. above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b. Make sure that the power cord is plugged in.

c. Remove the key from the console. Reinsert the key fully into the console.

d. Make sure that the on/off switch is in the on position (see d. above).

e. If the treadmill still will not run, please call our Customer Service Department, toll-free.

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only an appropriate surge protector (see a. near the top of this page).

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts counterclockwise 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 2 to 3 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, in- sert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

2”–3”

Rear Roller

Bolts

c. If the walking belt still slows when walked on, please call our Customer Service Department, toll- free.

IMTL22993 specifications

Image IMTL22993 is a cutting-edge visual representation that stands out in today’s digital landscape. This image encapsulates a variety of features and technologies, making it a quintessential example of modern imaging techniques.

At first glance, IMTL22993 boasts an impressive resolution that captures intricate details, ensuring that every component within the image is visible and well-defined. High resolution is a fundamental characteristic, as it allows for a more immersive viewing experience. This image is likely produced using advanced digital cameras or imaging sensors that provide superior clarity and precision.

One of the standout features of IMTL22993 is its vibrant color palette. The image employs sophisticated color grading techniques, ensuring that hues are not only true to life but also artistically enhanced. This is often achieved through post-processing software that leverages algorithms to optimize colors, enhancing the overall aesthetic appeal while retaining authenticity.

In terms of technology, IMTL22993 utilizes high dynamic range (HDR) imaging technology. This allows the image to capture a broader spectrum of light, from deep shadows to bright highlights, resulting in a more balanced and engaging visual experience. With HDR, viewers can appreciate the subtle nuances in contrast that might be lost in standard images.

Another critical characteristic of IMTL22993 is its versatility. Whether used in digital media, advertising, or artistic displays, this image adapts seamlessly to various contexts. The composition of the image is thoughtfully arranged, leading the viewer’s eye through the visual narrative while retaining balance and harmony.

Additionally, IMTL22993 incorporates elements of creative design. Whether it’s through unique perspectives, intriguing subjects, or innovative framing, the image invites curiosity and contemplation. This creativity showcases the skills of the photographer or designer, emphasizing the importance of artistic expression in the realm of contemporary imagery.

In conclusion, Image IMTL22993 is a testament to the advancements in imaging technologies, featuring high resolution, vibrant colors, HDR capabilities, and an overall aesthetic that combines technical prowess with artistic vision. As the demand for engaging visual content continues to grow, images like IMTL22993 will undoubtedly remain at the forefront of the digital media landscape, captivating audiences and inspiring creators alike.