HOW to Turn on the Power

1 Plug in the power cord (see page 10).

2	Locate the reset/off
	circuit breaker near
		Reset

	the power cord. Make
	the power cord. Make	Position
	sure that the circuit	Position


	breaker is in the reset
	position.

3 Stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing on page 11) and slide the clip onto the waistband of your clothes. Next, route the cord attached to the clip under the handgrip pulse sensor, and insert the key into the console. After a moment, the displays and various indicators will light. Test the clip by carefully taking a few steps backward until the key is pulled from the console. If the key is not pulled from the console, adjust the position of the clip.

HOW TO USE THE MANUAL MODE

1 Insert the key fully into the console.

See HOW TO TURN ON THE POWER above.

2 Select the manual mode.

When the key is in- serted, the manual mode will be selected

and the Manual indica-

tor will light. If a pro- gram has been

selected, press the Program Select button repeat- edly to reselect the manual mode.

3 Start the walking belt.

To start the walking belt, press the Start button, the Speed increase button, or one of the ten Quick Start buttons.

If the Start button or the Speed increase button is pressed, the walking belt will begin to move at 1 mph. As you exer-

cise, change the speed of the walking belt as de- sired by pressing the Speed increase and de- crease bu t t o n s. Each time a button is pressed, the speed setting will change by 0.1 mph; if a button is held down, the speed setting will change in in- crements of 0.5 mph.

If one of the Quick Start buttons is pressed, the walking belt will gradually increase in speed until it reaches the selected speed setting.

To stop the walking belt, press the Stop button. The Time/Pace display will begin to flash. To restart the walking belt, press the Start button or the Speed increase button.

Note: The first time the treadmill is used, observe the alignment of the walking belt, and align the walking belt if necessary (see page 27).

4 Change the incline of the treadmill as desired.

To change the incline of

the treadmill, press the Incline buttons. Each time a button is pressed,

the incline will change by 0.5%. Note: After the but-

tons are pressed, it may take a moment for the treadmill to reach the selected incline setting.

5 Follow your progress with the matrix and the displays .

The matrix—When the

manual mode or the iFIT.com mode is se- lected, the matrix will display a 1/4-mile track. As you exercise, the in- dicators around the track will light in succession

until the entire track is lit. The track will then darken and the indicators will again begin to light in succession.

Speed display—This display shows the speed of the walking belt.

IMTL515040 specifications

The Image IMTL515040 is an innovative technology designed to push the boundaries of imaging applications, providing exceptional quality and performance in various fields such as medical imaging, industrial inspection, and remote sensing. With a focus on high-resolution outputs, the IMTL515040 is engineered to meet the stringent demands of professionals who require accuracy and reliability in their imaging systems.

One of the standout features of the IMTL515040 is its advanced imaging sensor, which boasts a resolution of 5150 x 4040 pixels. This high pixel count allows for incredibly detailed images, enabling users to discern fine details that may be crucial for diagnostics or quality control processes. The sensor also supports a high dynamic range (HDR), ensuring that both bright and dark areas of an image are captured with great detail and clarity, minimizing the loss of information in high-contrast scenes.

In terms of technology, the IMTL515040 utilizes cutting-edge CMOS (Complementary Metal-Oxide-Semiconductor) technology. This type of sensor is known for its low power consumption and high-speed operation, making it ideal for applications that require rapid image capture without sacrificing quality. The integrated circuit design of CMOS sensors also allows for on-chip processing, enhancing the overall efficiency of image acquisition.

Another significant characteristic of the IMTL515040 is its versatility. It is compatible with various lenses and can be easily integrated into existing systems, providing flexibility in application. Whether used in a laboratory setting, in industrial automation, or in-field inspections, the IMTL515040 adapts to the needs of its environment, ensuring that users can obtain the best results regardless of the application.

Moreover, the IMTL515040 features robust connectivity options, including USB 3.0 and GigE (Gigabit Ethernet) interfaces, allowing for rapid data transfer and remote operation. This connectivity is essential for applications that require real-time processing and analysis, enabling users to keep pace with the demands of modern imaging tasks.

In conclusion, the Image IMTL515040 is a powerful imaging solution that stands out for its high-resolution capabilities, advanced sensor technology, versatility, and connectivity features. Designed to accommodate a diverse range of applications, it offers professionals the tools they need to achieve exceptional image quality and performance in their respective fields.