Distance/Incline dis, Next, stand on Foot rails

Note: The console can display speed and dis- tance in either miles or kilomet e r s . To find

which unit of measure- ment is selected, press

the Stop button while inserting the key into the console. An “E” for English miles or an “M” for met- ric kilometers will appear in the display. Press the Speed increase button to change the unit of mea- surement. When the desired unit of measurement is selected, remove the key and then reinsert it.

Note: For simplicity, all instructions in this manual refer to miles.

Distance/Incline dis-

play—This display shows the distance that you have walked or run and the incline level of

the treadmill. The dis-

play will change from one number to the other every few seconds. Note: Each time the incline changes, the display will show the incline setting for several seconds.

Calories/Pulse display—This display shows the approximate

number of calories you have burned. The dis-

play will also show your

heart rate when you use the handgrip pulse sen- sor or the optional chest pulse sensor. The display will change from one number to the other every few seconds.

Time/Pace display— When the manual mode or the iFIT.com mode is selected, this display will show the elapsed

time and your current

pace (pace is measured in minutes per mile). The display will change from one number to the other every few seconds. When a program is selected (except for the Self Select heart rate program), the display will show the time remaining in the pro- gram rather than the elapsed time.

To reset the displays, press the Stop button, re- move the key, and then reinsert the key.

6 Measure your heart rate if desired.

To use the hand-
grip pulse sen-
sor, first make
sure that your
hands are clean.
Next, stand on
the foot rails
and hold the	Contacts
pulse bar with	Contacts

your palms on the metal con-

tacts. Avoid moving your hands. When your pulse is detected, two dashes (– –) will appear in the Calories/Pulse display, and then your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds.

Note: The pulse bar is intended to be used only for heart rate measurement. Do not use the pulse bar as a handlebar. Always hold the handrails for support when you are not mea- suring your heart rate.

7 Turn on the fan if desired.

To turn on the fan, press the Fan button. To turn on the fan at high speed, press the button a sec- ond time. To turn off the fan, press the button a third time. Note: A few minutes after the walking belt is stopped, the fan will automatically turn off.

8 When you are finished exercising, remove the key from the console.

Step onto the foot rails, press the Stop button, and adjust the incline of the treadmill to the lowest setting . The incline must be at the lowest setting when the treadmill is folded to the storage posi- tion or the treadmill will be damaged. Next, re- move the key from the console and put it in a se- cure place. Note: If the displays and various indi- cators on the console remain lit after the key is removed, the console is in the “demo” mode. See page 23 and turn off the demo mode.

When you are finished using the treadmill, switch the reset/off circuit breaker to the off position and unplug the power cord.

IMTL515040 specifications

The Image IMTL515040 is an innovative technology designed to push the boundaries of imaging applications, providing exceptional quality and performance in various fields such as medical imaging, industrial inspection, and remote sensing. With a focus on high-resolution outputs, the IMTL515040 is engineered to meet the stringent demands of professionals who require accuracy and reliability in their imaging systems.

One of the standout features of the IMTL515040 is its advanced imaging sensor, which boasts a resolution of 5150 x 4040 pixels. This high pixel count allows for incredibly detailed images, enabling users to discern fine details that may be crucial for diagnostics or quality control processes. The sensor also supports a high dynamic range (HDR), ensuring that both bright and dark areas of an image are captured with great detail and clarity, minimizing the loss of information in high-contrast scenes.

In terms of technology, the IMTL515040 utilizes cutting-edge CMOS (Complementary Metal-Oxide-Semiconductor) technology. This type of sensor is known for its low power consumption and high-speed operation, making it ideal for applications that require rapid image capture without sacrificing quality. The integrated circuit design of CMOS sensors also allows for on-chip processing, enhancing the overall efficiency of image acquisition.

Another significant characteristic of the IMTL515040 is its versatility. It is compatible with various lenses and can be easily integrated into existing systems, providing flexibility in application. Whether used in a laboratory setting, in industrial automation, or in-field inspections, the IMTL515040 adapts to the needs of its environment, ensuring that users can obtain the best results regardless of the application.

Moreover, the IMTL515040 features robust connectivity options, including USB 3.0 and GigE (Gigabit Ethernet) interfaces, allowing for rapid data transfer and remote operation. This connectivity is essential for applications that require real-time processing and analysis, enabling users to keep pace with the demands of modern imaging tasks.

In conclusion, the Image IMTL515040 is a powerful imaging solution that stands out for its high-resolution capabilities, advanced sensor technology, versatility, and connectivity features. Designed to accommodate a diverse range of applications, it offers professionals the tools they need to achieve exceptional image quality and performance in their respective fields.