Important Precautions

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill.

1.It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.

2.Use the treadmill only as described in this manual.

3.Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.

4.Keep the treadmill indoors, away from mois- ture and dust. Do not put the treadmill in a garage or covered patio, or near water.

5.Do not operate the treadmill where aerosol products are used or oxygen is administered.

6.Keep children under the age of 12 and pets away from the treadmill at all times.

7.The treadmill should not be used by persons weighing more than 300 pounds. Never allow more than one person on the treadmill at a time.

8.Wear appropriate exercise clothes when using the treadmill. Do not wear loose clothes that could become caught in the treadmill. Athletic support clothes are recommended for both men and women. Always wear ath- letic shoes. Never use the treadmill with bare feet, wearing only stockings, or in sandals.

9.When connecting the power cord (see page 10), plug the power cord into a surge suppressor (not included) and plug the surge suppressor into a grounded circuit capable of carrying 15 or more amps. No other appliance should be on the same circuit. Do not use an extension cord.

10 . Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. To purchase a surge suppressor, see your local IMAGE dealer or call 1-800-753-4645 and order part number 146148.

11 . Failure to use a properly functioning surge suppressor could result in damage to the con- trol system of the treadmill. If the control sys- tem is damaged, the walking belt may change speed or stop unexpectedly, which may result in a fall and serious injury.

12.Keep the power cord and the surge s u p p r e s- sor away from heated surfaces.

13.Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See BEFORE YOU BEGIN on page 5 if the tread- mill is not working properly.)

14.Never start the treadmill while you are stand- ing on the walking belt. Always hold the handrails while using the treadmill.

15.The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed.

16.The pulse sensor is not a medical device. Various factors, including the user's move- ment, may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general.

17.Never leave the treadmill unattended while it is running. Always remove the key, unplug the power cord, and move the reset/off circuit breaker to the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the circuit breaker.)

18.Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO FOLD AND MOVE THE TREADMILL on page 24.) You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

19.When folding or moving the treadmill, make sure that the storage latch is fully closed.

IMTL515040 specifications

The Image IMTL515040 is an innovative technology designed to push the boundaries of imaging applications, providing exceptional quality and performance in various fields such as medical imaging, industrial inspection, and remote sensing. With a focus on high-resolution outputs, the IMTL515040 is engineered to meet the stringent demands of professionals who require accuracy and reliability in their imaging systems.

One of the standout features of the IMTL515040 is its advanced imaging sensor, which boasts a resolution of 5150 x 4040 pixels. This high pixel count allows for incredibly detailed images, enabling users to discern fine details that may be crucial for diagnostics or quality control processes. The sensor also supports a high dynamic range (HDR), ensuring that both bright and dark areas of an image are captured with great detail and clarity, minimizing the loss of information in high-contrast scenes.

In terms of technology, the IMTL515040 utilizes cutting-edge CMOS (Complementary Metal-Oxide-Semiconductor) technology. This type of sensor is known for its low power consumption and high-speed operation, making it ideal for applications that require rapid image capture without sacrificing quality. The integrated circuit design of CMOS sensors also allows for on-chip processing, enhancing the overall efficiency of image acquisition.

Another significant characteristic of the IMTL515040 is its versatility. It is compatible with various lenses and can be easily integrated into existing systems, providing flexibility in application. Whether used in a laboratory setting, in industrial automation, or in-field inspections, the IMTL515040 adapts to the needs of its environment, ensuring that users can obtain the best results regardless of the application.

Moreover, the IMTL515040 features robust connectivity options, including USB 3.0 and GigE (Gigabit Ethernet) interfaces, allowing for rapid data transfer and remote operation. This connectivity is essential for applications that require real-time processing and analysis, enabling users to keep pace with the demands of modern imaging tasks.

In conclusion, the Image IMTL515040 is a powerful imaging solution that stands out for its high-resolution capabilities, advanced sensor technology, versatility, and connectivity features. Designed to accommodate a diverse range of applications, it offers professionals the tools they need to achieve exceptional image quality and performance in their respective fields.