CONSOLE DIAGRAM
Note: If there are sheets of clear plastic |
|
on the console, remove the plastic. | Key |
Clip
FEATURES OF THE CONSOLE
The treadmill console offers a selection of features designed to make your workouts more effective. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button. As you exercise, the console will display continuous exercise feedback. You can even measure your heart rate using the
Step Program
Walking is one of the most popular exercises world- wide. Walking does not require advanced conditioning or special skills, yet it produces numerous benefits, such as increased calorie burning, a slimmer waist, toned muscles, enhanced energy and stamina, lower blood pressure, and reduced stress.
To track your walking exercise, the console features a new step program that counts the number of steps that you take during each workout. In addition, the console offers a step program that allows you to enter the num- ber of steps that you plan to walk, and counts down the steps as you exercise.
More reliable than conventional pedometers, the tread- mill’s step program is highly accurate with most users. For the best results, try to maintain a steady pace, a uniform stride length, and a consistent position on the treadmill as you walk. Lighter users may also find it helpful to reduce the incline of the treadmill or to increase the speed of the walking belt.
Calorie Goal Programs
The console also features four calorie goal programs. Each program controls the speed and incline of the treadmill to help you burn unwanted pounds.
To use the manual mode of the console, follow the steps beginning on page 13. To use a step program, see page 15. To use a calorie goal program, see page 16.
HOW TO TURN ON THE POWER |
|
|
|
|
| |
Plug in the power cord (see |
|
|
|
|
|
|
|
|
|
|
|
| |
page 11). Next, locate the |
|
|
|
|
|
|
reset/off circuit breaker on |
| Reset |
|
|
|
|
the treadmill frame near the |
| Position |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
| ||
power cord. Make sure that |
|
|
|
|
|
|
the circuit breaker is in the |
|
|
|
|
|
|
|
|
|
|
|
| |
“reset” position. |
|
|
|
|
| |
Next, stand on the foot rails of the treadmill. Locate the clip attached to the key (see the drawing above), and slide the clip securely onto the waistband of your clothes. Then, insert the key into the console; after a moment, the display will light. Important: In an emergency situation, the key can be pulled from the console, causing the walking belt to slow to a stop. Test the clip by carefully taking a few steps backward; if the key is not pulled from the console, adjust the position of the clip.
Note: To prevent damage to the walking platform, always wear clean shoes while using the treadmill.
12