Image IMTL39606.3 user manual Upright Wire 28 does not fall into the Right Upright

Page 7

2.Orient the Left Upright (31) as shown, and attach it to the Base (48) with two Upright Bolts (40) and two Upright Star Washers (39); do not tighten the Upright Bolts yet.

3.Attach a Wheel (45) to each side of the Base (48) with a Wheel Bolt (40), two Wheel Spacers (44), and a Nut (47) as shown. Do not over- tighten the Wheel Bolts; the Wheels should turn freely.

4.Turn the Base (48) over, and set it near the front of the treadmill as shown.

Cut the tie holding the Upright Wire (28) in a bun- dle.

Wrap the wire tie in the Right Upright (36) around the end of the Upright Wire (28). Then, pull the other end of the wire tie until the Wire Harness is extending from the upper end of the Right Upright. Secure the Upright Wire to the top of the Right Upright so that it will not fall inside.

Raise the Uprights (31, 36) so the Base (48) is flat on the floor. Make sure that the end of the

Upright Wire (28) does not fall into the Right Upright.

2

 

 

 

 

Latch

 

 

 

Holes

 

 

 

48

 

 

 

31

 

 

 

 

 

39

 

 

39

40

 

 

 

3

45

44

 

44

 

40

 

 

 

 

47

 

 

45

44

 

 

44

47

 

 

 

 

 

40

48

 

 

4

 

 

 

 

Large

 

 

 

Hole

 

 

 

48

 

 

31

 

Wire

 

 

Tie

 

 

28

 

 

 

36

 

28

 

 

 

28

 

 

Wire Tie

7

Image 7
Contents Mon.-Fri., 6 a.m.-6 p.m. MST QUESTIONS?Model No. IMTL39606.3 Serial No Call TOLL-FREETable of Contents Important Precautions Page Back Right Side Before YOU BeginTighten the Upright Bolts yet AssemblyUpright Wire 28 does not fall into the Right Upright Frame Bolt yet Outer side of the Frame Spacer facing33, and a Nut 47 do not tighten the Frame Bolt yet Front View Upright WireSide View View from Above Do not overtighten the Frame BoltsHOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Step Program Console DiagramFeatures of the Console HOW to Turn on the PowerHOW to USE the Manual Mode Whenkey. you are finished exercising, remove Always walk at a speed that is comfortable for youMeasure your heart rate if desired Turn on the fan if desiredWhen the program is completed, remove Key from the console HOW to USE a Step ProgramSelect a step program Press the Start button to start the program HOW to USE a Calorie Goal ProgramInformation MODE/DEMO Mode HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked on Exercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Key No. Qty Description Part LIST-Model No. IMTL39606.3Exploded DRAWING-Model No. IMTL39606.3 Limited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT