6. SYMPTOM: THE DISPLAYS OF THE CONSOLE DO NOT FUNCTION PROPERLY
a. Remove the key and unplug the power cord. Remove the screws from the hood. Carefully remove the hood. Locate the Reed Switch (74) and the Magnet (95) on the left side of the Pulley (17). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that there is a 1/8Ógap between the Magnet and the Reed Switch. If necessary, loosen the Screw
(90)and move the Reed Switch slightly. Retighten the Screw.
1/8Ó | 17 | |
90 | ||
| ||
74 | 95 | |
| ||
Top |
| |
View |
|
17