4 Set the on-time you want the unit to turn on.
1)Press 4or ¢ to set the hour, then press SET.
2)Press 4or ¢ to set the minute, then press SET.
“OFF TIME” appears for 2 seconds, then the unit enters
5 Set the off-time you want the unit to turn off (on standby).
1)Press 4or ¢ to set the hour, then press SET.
2)Press 4or ¢ to set the minute, then press SET.
The unit enters preset station selecting mode.
6 Select the preset station.
1)Press 4or ¢ to select the band (“TUNER FM” or “TUNER AM”), then press SET.
2)Press 4or ¢ to select a preset
channel number, then press SET. The REC (Recording Timer) indicator
stops flashing and remains lit. The
settings you have done are shown on the display in sequence.
7 Press POWER to turn off the unit 
(on standby) if necessary.
If you want to listen to another source while recording
Press REC START/STOP to stop recording. Without stopping it, you cannot change the source.
To turn on or off Recording Timer after its setting is done
1 Press CLOCK/TIMER repeatedly until “REC” appears on the display.
2 To turn off the Recording Timer, press
CANCEL.
The REC (Recording Timer) indicator goes off from the display.
The Recording Timer is canceled, but the setting for the Recording Timer remains in memory.
To turn on the Recording Timer, press SET.
The REC (Recording Timer) indicator lights up on the display. The settings you have done are shown on the display in sequence for your confirmation.
Using Sleep Timer
With Sleep Timer, you can fall asleep to music. You can set Sleep Timer when the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time length passes.
On the remote control ONLY:
1 Press SLEEP.
The time length until the
•Each time you press the button, the time length changes as follows:
10
20
30 
60 
90 
120
Canceled
2 Wait for about 5 seconds after specifying the time length.
The SLEEP indicator stops flashing and remains lit.
To check the remaining time until the
To change the
To cancel the setting, press SLEEP repeatedly so that the SLEEP indicator goes off.
• Sleep Timer is also canceled when you turn off the unit.
Timer Priority
Since each timer can be set separately, you may wonder what happens if the setting for these timers overlaps.
Here are examples.
•Recording Timer has priority over Daily Timer and Sleep Timer.
If Daily Timer is set to come on while Recording Timer is operating, Daily Timer will not come on at all.
AM 6:00 6:30 7:00 7:30
Recording Timer
Daily Timer
does not work.
If Recording Timer is set to come on while Sleep Timer is operating, Sleep Timer will not work (the SLEEP indicator
does not go off). | 7:00 | 7:30 |
AM 6:00 6:30 |
Recording Timer
Sleep Timer
does not work.
– 22 –