HOW TO USE THE MANUAL MODE
1 Insert the key fully into the console.
See GETTING STARTED on page 10.
2 Select the manual mode.
When the key is inserted, the manual mode will automatically be selected. If a program has been selected, press the Select Workout Goal button repeatedly until the words “MANUAL MODE” appear in the main display.
3 Press the Start button or the Speed + button to start the walking belt.
A moment after the button is pressed, the walking belt will begin to move at 1 mph. Hold the handrails and begin walking. As you exercise, change the speed of the walking
belt as desired by pressing the Speed +
and – buttons. Each time a button is pressed, the speed set-
ting will change by 0.1
mph; if a button is held down, the speed setting will change in increments of 0.5 mph. To change the speed setting quickly, press the
During the first few minutes that you use the tread- mill, inspect the alignment of the walking belt, and align the walking belt if necessary (see page 27).
To stop the walking belt, press the Stop button. The time will begin to flash in the main display. To restart the walking belt, press the Start button or the Speed + button.
4 Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the Incline ▲ and ▼ buttons. Each time a button is
pressed, the incline will change by 0.5%. To
change the incline quickly, press the
5 Follow your progress with the LED track, the Training Zone display, and the main display.
The LED
the manual mode or the iFIT.com mode is se- lected, the program dis- play will show an LED
track representing 1/4
mile. As you exercise, the indicators around the track will light in sequence until you have walked or run 1/4 mile. A new lap will then begin.
The Training Zone dis-
For example, if four to six indicators in the display are lit, your intensity level is ideal for fat burning.
The main
Distance/Laps—The next section of the main
display shows the dis- tance that you have
walked and the number of
completed. The display will change from one num- ber to the other as shown by the indicators.
Calories/Heart Rate— When you are not using
the handgrip pulse sen- sor, the center of the main display will show the approximate number
of calories you have burned. When you are using the handgrip pulse sensor, the display will show your heart rate (see step 6 on page 12).
iFIT.com mode is se- lected, the main display will show the elapsed time and your current
pace (pace is measured in minutes per mile). The display will change from one number to the other
11