NordicTrack NTL12905.0 manual HOW to USE a Preset Program, Select a preset program

Page 16

HOW TO USE A PRESET PROGRAM

1 Insert the key into the console.

See HOW TO TURN ON THE POWER on page 12.

Use the main menu to enter or change settings

2 if desired.

See HOW TO USE THE MAIN MENU on page 12.

3 Select a preset program.

To select a preset program, press the Walk, Jog, or Run button repeatedly.

When a preset program is selected, the display will show the name of the program, the maximum incline setting and the maximum speed setting of the program, and the program time. In addition, a graph of the speed settings of the program will ap- pear in the center of the display. Note: A graph of the incline settings of the program may also ap- pear (see step 5 on page 13).

Each preset program is divided into 30 one- minute segments. One speed setting and one in- cline setting are programmed for each segment. Note: The same speed setting and/or incline set- ting may be programmed for two or more consec- utive segments.

4 Press the Start button to start the program.

A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and incline settings for the program. Hold the handrails and begin walking.

Select a display mode and monitor your

5 progress with the display.

When a preset program is selected, the console offers three display modes. Press the Display but- ton repeatedly to select the desired display mode.

If the first or second display mode is selected, a graph of the speed settings of the program will ap- pear in the display. A small arrow below the graph will indicate your progress.

At the end of the first one-minute segment of the program, a series of tones will sound. If a different speed setting and/or incline setting is pro- grammed for the second segment, the speed set- ting and/or incline setting will appear at the top of the display for a moment (or flash in the display, depending on which display mode is selected) to alert you. When the first segment ends, the tread- mill will automatically adjust to the speed and in- cline settings for the second segment.

The program will continue in this way until the small arrow reaches the right end of the graph. The walking belt will then slow to a stop.

If the third display mode is selected, the display will show an animation of a runner.

At the end of the first one-minute segment of the program, a series of tones will sound. If a different speed setting is programmed for the second seg- ment, the speed setting will move along the bot- tom of the display to alert you. If a different incline setting is programmed, the incline setting will ap- pear at the top of the display for a moment. When the first segment ends, the treadmill will automati- cally adjust to the speed and incline settings for the second segment.

The program will continue in this way until the last segment ends. The walking belt will then slow to a stop.

16

Image 16
Contents Model No. NTL12905.0 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Make sure that the power cord is unplugged AssemblyExtension Leg Bolts Page Page Wire HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console HOW to Turn on the Power HOW to USE the Main MenuPress the Menu button View the OdometerHOW to USE the Manual Mode Change the incline of the treadmill as desired Measure your heart rate if desired Pulse sensor. Next, stand on the foot railsTurn on the fan if desired Whenkey. you are finished exercising, removeSelect a preset program HOW to USE a Preset ProgramPress the Start button to start the program HOW to Create a Custom Program Select a Custom programHOW to USE a Custom Program Adjust the maximum target heart rate setting if Desired HOW to USE a Heart Rate ProgramSelect a Heart Rate program Turn on the fan if desired HOW to Connect the Treadmill to USE Ifit Programs HOW to Connect Your MP3 Player or CD PlayerHOW to Connect Your Portable Stereo Audio CableHOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR HOW to USE AN Ifit MP3, CD, or Video ProgramSelect the iFIT mode Press the Play button on your MP3 player, CD Player, or VCRTurn on the fan if desired Follow the on-line instructions to start Program HOW to USE AN Ifit Program Directly from OUR WEB SiteReturn to the treadmill and stand on the foot HOW to Adjust the Cushioning System Information ModeOptional Chest Pulse Sensor HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop View Problem The walking belt slows when walked on Page Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches R0905B Qty DescriptionOrdering Replacement Parts Exploded DRAWING-Model No. NTL12905.0 NTL12905.0 Limited Warranty