JVC UX-V100, CA-UXV100, SP-UXV100 manual Specifications

Page 26

Specifications

UX-V100(CA-UXV100 and SP-UXV100)

Amplifier

Output Power

44 W (22 W + 22 W) at 4 Ω (Max.)

 

40 W (20 W + 20 W) at 4 Ω (10% THD)

Input Sensitivity/Impedance (1 kHz)

 

LINE IN (AUX)

400 mV/48 kΩ

Speaker terminals

4 Ω - 16 Ω

Phones

16 Ω - 1 kΩ

 

0 mW - 15 mW per channel output into 32 Ω

Cassette Deck

Frequency Response

 

Type I (Normal)

50 Hz - 14 kHz

Type II (CrO2)

50 Hz - 15 kHz

Wow and Flutter

0.15% (WRMS)

CD Player

Signal-To-Noise Ratio

90 dB

Wow And Flutter

Immeasurable

Tuner

FM Tuner

 

Tuning Range

87.5 MHz - 108.0 MHz

AM Tuner

 

Tuning Range

(MW) 522 kHz - 1 629 kHz

 

(LW) 144 kHz - 288 kHz

Speaker Specifications

(each unit)

 

Speakers

8 cm cone × 1

Impedance

4 Ω

Dimensions

140 mm × 230 mm × 211 mm (W/H/D)

Mass

Approx. 1.8 kg

General

Dimensions 438 mm × 234 mm × 279 mm (W/H/D)

Mass Approx. 6.8 kg

Power Specifications

Power Requirements

AC 230 V

, 50 Hz

Power Consumption

50 W (power on mode)

 

3.7 W (in Standby mode)

Accessories

See page 2.

Design and specifications are subject to change without notice.

22

EN10-22.UX-V100[B]f

22

12/12/00, 12:34 PM

Image 26
Contents Micro Component System UX-V100- Consists of CA-UXV100 and SP-UXV100Classification LABEL, Placed on Rear Enclosure If in Doubt Consult a Competent ElectricianReproduction of Labels Class 1 Laser ProductUX-V100 Above ALL Table of Contents Using the Remote Control AccessoriesHow to Put Batteries in the Remote Control Getting StartedUsing the supplied Wire Antenna Connecting the FM AntennaConnecting the AM MW/LW Antenna Using the coaxial type connector not suppliedLine in AUX Connecting the SpeakersConnecting External Equipment Connecting the AC Power Cord On the Unit On the Remote ControlCommon Operations Turning the Power On and OffAdjusting the Volume Turning the System onReinforcing the Bass Sound AHB PRO Adjusting the bass levelAdjusting the treble level Controlling the Tone Bass/ TreblePresetting Stations Using the TunerTuning In a Station Presetting stations manuallyTo restore the stereo effect, press the FM Mode button on Changing the FM Reception ModePresetting stations automatically Press the SET button within 5 secondsUnloading a CD Using the CD PlayerInserting a CD Quickest way to start a CD is with the one touch operationBasics of Using the CD Player Normal Play Programing the Playing Order of the TracksPlaying at Random Press the Random button on the Remote ControlPress the Repeat button on the Remote Control Repeating TracksStandard Play Using the Cassette Deck Listening to a TapeReverse Mode One touch playThings to know before you start recording Using the Cassette Deck RecordingStandard Recording Check the recording direction for the tapePress the CD #/8 button twice CD Direct RecordingOne track recording To stop at any time during the recording process, pressListening to External Equipment Using External EquipmentAUX AHB PRO Volume + To exit from AUX mode, select another sourceSetting the Clock Using the TimersSetting the Daily Timer Setting the Recording Timer Setting the Sleep Timer Insert a blank or erasable tape into the Cassette DeckCare and Maintenance Possible Cause TroubleshootingSymptom ActionSpecifications 1200MWMMDWJEM