HOW to Connect Your VCR, Audio Adapter Cable

HOW TO CONNECT YOUR VCR

Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 20.

A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter. Plug the adapter into the AUDIO OUT jack on your VCR.

HOW TO USE IFIT.COM CD AND VIDEO PROGRAMS

To use iFIT.com CDs or videocassettes, the treadmill must be connected to your portable CD player, portable stereo, home stereo, computer with CD player, or VCR. See HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER on page

19.Note: To purchase iFIT.com CDs or videocas- settes, call toll-free 1-800-735-0768.

Follow the steps below to use an iFIT.com CD or video program.

A				1
			ANT. IN
	VIDEO AUDIO
	IN
			RF OUT
	OUT	3CH 4
	AUDIO OUT
	RIGHT
	LEFT			2
Audio	Adapter			2
Audio	Adapter
Cable

B. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter.

Plug the adapter into an RCA Y-adapter (available 3 at electronics stores). Next, remove the wire that is currently plugged into the AUDIO OUT jack on your VCR and plug the wire into the unused side of the Y-adapter. Plug the Y-adapter into the AUDIO OUT

jack on your VCR.

Insert the key fully into the console.

See GETTING STARTED on page 10.

Select the iFIT.com mode.

When the key is in- serted, the manual

mode will be selected. To use an iFIT.com CD

or video program, press the iFIT.com button or

press the Select Program button repeatedly until the indicator beside the iFIT.com button lights.

Insert the iFIT.com CD or videocassette.

If you are using an iFIT.com CD, insert the CD into your CD player. If you are using an iFIT.com videocassette, insert the videocassette into your VCR.

B
		ANT. IN
	VIDEO AUDIO
	IN
		RF OUT
		CH
	3	4
	OUT
Audio	RCA Y-adapter
Audio
Cable	Adapter
Wire removed from
AUDIO OUT jack

4 PressVCR. the PLAY button on your CD player or

A moment after the button is pressed, your per- sonal trainer will begin guiding you through your workout. Simply follow your personal trainer’s instructions. Note: If the Time display is flashing, press the Start button or the Speed + button on the console. The treadmill will not respond to a CD or video program when the Time display is flashing.

During the CD or video program, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change.

CAUTION: Always listen for the “chirp” and be prepared for speed and/or incline changes. In some instances, the speed and/or incline may change before the personal trainer describes the change.