Reebok Fitness RBTL22921 manual Uprights 65 as shown, with the Bumpers 98 under

Page 7

3. (Note: The parts shown in this step may be preassembled

3

 

 

 

 

but may need to be adjusted.) With the help of a second

 

 

 

 

 

 

 

 

 

person, raise the Frame (55) and hold it. Insert the Left

 

 

 

 

 

Frame Guide (68) into the left side of the Frame. Remove

 

 

 

 

 

the Latch Knob (67) from the Latch Pin (72). Make sure

 

Hole

55

 

10

that the Latch Pin Collar (70) and the Spring (69) are on

 

 

 

 

 

 

5

the Latch Pin. Insert the Latch Pin into the Frame and the

 

 

70

 

Left Frame Guide. Press the Latch Insert (5) onto the

 

 

72

 

 

Frame, with the Latch Pin in the center hole. Tighten the

 

 

 

 

 

Latch Knob onto the Latch Pin.

68

 

 

69

67

 

62

 

 

Align the Latch Pin (72) with the hole in the Left Foam

 

 

 

 

 

 

 

 

Grip (62) by sliding the Left Frame Guide (68) up or down.

 

 

 

 

 

Make sure that the Latch Pin can be inserted fully into the

 

 

 

 

 

hole. Hold the Left Frame Guide in place and tighten two

 

 

 

 

 

1/2” Screws (10) into the Latch Insert and the Left Frame

 

 

 

 

 

Guide. Note: It may be necessary to pull the Latch Knob

 

 

 

 

 

(67) to access and tighten the Screws.

 

 

 

 

 

4. Raise the treadmill to the storage position (see HOW TO

4

 

 

 

 

FOLD THE TREADMILL FOR STORAGE on page 24).

 

 

 

 

 

 

 

 

 

Have a second person hold the treadmill in the upright posi-

 

 

13

 

 

26

 

 

 

 

tion. Position the U-base (20) against the base of the

 

 

 

 

 

 

 

 

 

Uprights (65) as shown, with the Bumpers (98) under the

 

 

 

 

 

U-base.Finger tighten two 2” Bolts (26) with Base

 

 

 

 

 

Washers (129) into the base of the Uprights and the U-

 

 

129

 

 

base. Then, attach the U-base with two 3” Bolts (23), two

 

23

 

13

Base Washers (129), and two Nuts (13). Tip the treadmill

 

26

 

 

 

 

 

forward if necessary. Tighten the two 2” Bolts.

 

 

 

 

 

 

65

 

 

 

 

 

 

 

5. Make sure that all parts are properly tightened before

 

 

129

 

 

98

 

 

 

 

you use the treadmill. Place a mat beneath the tread-

20

 

 

 

 

 

 

 

mill to protect the floor. For your benefit, familiarize your-

 

 

98

23

 

self with the information on pages 25 and 26.

 

 

 

 

 

 

 

PART IDENTIFICATION CHART

Screw (40)–8

3/4” Screw (101)–4

2” Bolt (26)–2

 

3” Bolt (23)–2

 

 

Nut (13)–2

Base Washer (129)–4

Plastic Fastener

(75)–4

7

Image 7
Contents Model No. RBTL22921 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Page Back Before YOU BeginRight Side Assembly You use the treadmill. Place a mat beneath the tread Part Identification ChartUprights 65 as shown, with the Bumpers 98 under Make sure that all parts are properly tightened beforeChest Pulse Sensor Troubleshooting HOW to USE the Chest Pulse SensorHOW to PUT on the Chest Pulse Sensor Chest Pulse Sensor Care and MaintenanceTreadmill Operation HOW to Plug in the Power CordPerformant Lubetm Walking Belt Features of the Console HOW to USE the Manual Mode HOW to Turn on the PowerSee page 23 and turn off the demo mode When you are finished exercising, removeAdjust the incline of the treadmill to the lowest Removed, the console is in the demo modeSelect one of the preset workout programs HOW to USE Preset Workout ProgramsSelect a heart rate program HOW to USE Heart Rate ProgramsFollow your progress with the displays Put on the chest pulse sensorEnter your age and a maximum speed setting When the program has ended, remove the key HOW to Create Custom ProgramsSelect one of the custom programs HOW to USE Custom Programs HOW to Connect Your Portable CD Player HOW to Connect Your Computer HOW to Connect Your Home StereoVCR HOW to Connect Your VCRInsert the key into the console Press the Play button on your CD player orWhenkey. the program is completed, remove Measure your heart rate, if desiredFollow your progress with the LED track Displays HOW to USE Programs Directly from OUR WEB SiteFollow the on-line instructions to start Program Return to the treadmill and stand on the footHOW to Adjust the Firmness of the Cushioning System Information MODE/DEMO ModeHOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillProblem The power turns off during use TroubleshootingProblem The walking belt slows when walked on Top Problem The heart rate monitor does not function properlyWalking and Reduced Risk for CARDIOVAS- Cular Disease Walking and Weight ReductionReebok University Walking and Cardiorespiratory EnduranceWalking and Injuries Walking and Stress ReductionReferences Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesQty Description R0703AHOW to Order Replacement Parts RBTL22921 Exploded Limited Warranty