Life Fitness 95T operation manual Malfunction Probable Cause Corrective Action

TROUBLESHOOTING THE TREADMILL (CONTINUED)

Malfunction	Probable Cause	Corrective Action
Striding Belt slips off-center	Uneven floor surface.	Check levelers and level treadmill.
		Check striding belt & re-tension as neces-
		sary. Refer to Section 2.5 “How to Adjust
		and Tension the Striding Belt.”
Maximum speed is reduced	User is pushing striding belt.	Instruct users not to push striding belt in
	This occurs when the runner is running	either direction.
	faster than the striding belt will travel, with
	the result of the striding belt being pushed
	with the runner’s feet.
	User is stalling striding belt.
	This will occur with heavier users at lower
	striding belt speeds. The striding belt will
	“stall” if the user is traveling slower than
	the striding belt speed.
	Striding belt/deck malfunction. The deck	Replace belt and deck.
	laminate worn through or the underside of
	striding belt glazed over (hard, glossy).
	Insufficient power source.	Plug treadmill into a dedicated 20 amp. cir-
		cuit.
Rubbing sound from underneath machine	Foreign objects may be stuck underneath	Inspect underneath striding belt and
	the machine.	machine. Remove any debris or objects
		that may cause interference with the tread-
		mill.
		Plug treadmill into a dedicated 20 amp cir-
		cuit.
Display does not illuminate when machine	Insufficient power source.	Check all electrical connections for proper
		attachment.
is powered on
	Loose 10 pin connection at	Contact Life Fitness Customer Support
	display console or DSP Motor Control	Services*.
	Board. to wire.
	Loose 28 pin connector at display console.	Contact Life Fitness Customer Support
		Services*.
	10 pin to 10 pin under console bridge.	Contact Life Fitness Customer Support
		Services*.

* See Section 2.7, How to Obtain Product Service, for contact information.

16