Operation

•Always follow the console instructions for proper operation.

•Never insert objects into any opening in this product. If an object should drop inside, turn off the power, unplug the power cord from the outlet, and carefully retrieve it. If the item cannot be reached, contact Life Fitness Customer Support Services.

•Do not reach into, or underneath, the unit or tip it on its side during operation.

•Never place liquids of any type directly on the unit, except in an accessory tray or holder. Containers with lids are recommended.

•Do not use this product in bare feet. Always wear shoes. Wear shoes with rubber or high-traction soles. Do not use shoes with heels, leather soles, cleats or spikes. Make sure no stones are embedded in the soles.

•Keep all loose clothing, shoelaces, and towels away from moving parts.

•Handrails may be held to enhance stability as needed, but are not for continuous use.

•Never mount or dismount the treadmill while the running belt is moving. Use the handrails whenever additional sta- bility is required. In case of an emergency, such as tripping, grasp the handrails, and place the feet on the side plat- forms.

•Never walk or jog backwards on the treadmill.

•The system issues immobilization of the treadmill when a pre-defined hard key sequence has been activated by the club manager. This sequence is currently defined as 3 STOP key presses followed by 3 SPEED DOWN ARROW key presses. To prevent false toggling of the Immobilized feature, this sequence should be limited to a pre-defined time period (i.e. sequence must be done in a 5-10 second period). Sequence should also enforce that only PRESSED events are used (i.e. if HELD or RELEASED are detected during the sequence then, the sequence is rejected). Once the Workout Logic sees this event, it toggles the Immobilization configuration item, saves it in the registry, and then issues an ImmobilizationStatus event to the system.

SAVE THESE INSTRUCTIONS

FOR FUTURE REFERENCE.