Life Fitness Customer Support Services

10.	Locate the HANDRAIL CROSSBAR (#9). With the bend facing upward and
	pitched toward the DISPLAY CONSOLE, carefully place the HANDRAIL
	CROSSBAR between the user LEFT AND RIGHT HANDRAILS (#4) as shown
	and align the mounting holes. Insert one SHORT MOUNTING BOLT (#6) on
	either end of the HANDRAIL CROSSBAR and tighten using a 5/32” hex key
	wrench.
	Securely tighten all mounting bolts on the USER LEFT HANDRAIL (#4).
11.	Securely tighten the four MOUNTING BOLTS (#10) securing the USER LEFT
	and RIGHT UPRIGHTS to the FRAME (B).
12.	Place the STOP CORD (#12) in the proper location.

13. Position the unit in the desired location and plug the power cord into the front of

the unit and then into a wall outlet (See the operation manual for power

requirements.)

14. Position the MOTOR COVER (A) back over the MOTOR COMPARTMENT

(H). Bring the unit to an incline position (refer to the Operation Manual for

proper start and incline procedures.) Secure the MOTOR COVER (A) to the

FRAME (B) using the two MOTOR COVER SCREWS (#11). Tighten the

screws securely. Press down on the MOTOR COVER at the positions

indicated to secure the Dual-Lock fasteners located under the MOTOR

COVER to the FRAME. Lift lightly on the MOTOR COVER to confirm a positive

lock. Repeat as necessary until the MOTOR COVER is secure. Lower the unit

back to its original level.

NOTE: Be careful not to pinch the WIRE HARNESS (C) when replacing the

MOTOR COVER (a).

Press

REMARQUE : Veiller à ne pas pincer le faisceau de CABLES (C) lors de la

remise en place du CAPOT DU MOTEUR (A).

15. Place an UPPER HANDRAIL COVER (#13) on the top of each HANDRAIL

(#4). Align the tabs of the UPPER HANDRAIL COVERS with the slots in the

TOP HANDRAIL SPACERS (#5) and apply light pressure until the UPPER

HANDRAIL COVERS snap secure.

11 B

PRE-OPERATION CHECKLIST

Ensure that all fasteners are tight.

Make sure the STRIDING BELT is properly tensioned and aligned according to the Operation Manual.

Check the operation of the STOP switch and tether switch assembly.

(See Operation Manual.)

Confirm the display console is set to English or Metric units.

(See Optional Settings ENG/MET in Operation Manual.)

Read the entire Operation Manual before using the treadmill.

Before attempting to operate your Treadmill, it is imperative that you familiarize yourself with the contents of the Operation Manual. If your Life Fitness treadmill does not respond as described in the OPERATION MANUAL contact the nearest Life Fitness Service Center as listed in the OPERATION MANUAL.

Life Fitness Customer Support Services

at (800) 351-3737

Prior to your call, please be sure you have located and noted the

MODEL NUMBER & SERIAL NUMBER.

The Model & Serial number information of your Life Fitness Treadmill is contained in a label

located on the front of the unit.

7995101 Rev A2

12/05

T35 specifications

The Univex T35 is a versatile and robust kitchen machine designed for commercial and industrial food preparation. With its powerful motor and a variety of attachments, the T35 caters to the needs of both professional chefs and culinary enthusiasts, making it an essential tool in any busy kitchen.

One of the standout features of the Univex T35 is its heavy-duty construction. Built with high-quality materials, the machine is designed to withstand the rigors of daily use in commercial kitchens. Its durable design ensures longevity, making it a worthwhile investment for restaurants, catering businesses, and bakeries.

The T35 comes equipped with a powerful motor that delivers impressive mixing capabilities. This efficiency allows it to handle large volumes of dough and batter with ease, making it ideal for businesses that require the preparation of high quantities of food. Furthermore, the motor is designed to maintain consistent speed and torque, ensuring optimal mixing results every time.

Another notable feature of the Univex T35 is its user-friendly controls. The machine includes intuitive settings that allow users to adjust the speed and mixing time according to their specific needs. This flexibility facilitates the creation of a wide range of culinary items, from light and airy batters to dense doughs.

The T35 also boasts a range of attachments, enhancing its versatility further. This includes a dough hook, flat beater, and wire whip, each designed for specific mixing tasks. Additionally, the machine may support optional attachments, such as food processors and shredders, providing even greater functionality.

Safety is a key consideration in the design of the Univex T35. The machine is equipped with safety features, such as a safety guard and a non-slip base, ensuring that it remains stable during operation. These measures prevent accidents and contribute to a secure working environment.

In summary, the Univex T35 is a powerful and reliable kitchen machine that is highly regarded in the culinary world. With its heavy-duty construction, powerful motor, user-friendly controls, and a variety of attachments, it caters to the diverse needs of professional kitchens. Its focus on safety and efficiency makes it a valuable asset for any food service establishment looking to enhance productivity and streamline food preparation processes.