Spirit ET2, ET4 owner manual Important Safety Instructions

Page 4

Important Safety Instructions

WARNING - Read all instructions before using this appliance.

DANGER - To reduce the risk of electric shock disconnect your Spirit treadmill from the electrical outlet prior to cleaning and/or service work.

WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install the treadmill on a flat level surface with access to a 120-volt, 15-amp grounded outlet.

DO NOT USE AN EXTENSION CORD UNLESS IT IS 14AWG OR BETTER, WITH ONLY ONE OUTLET ON THE END. The treadmill should be the only appliance in the circuit in which it is connected. DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING IMPROPER ADAPTERS, OR IN ANY WAY MODIFY THE CORD SET. A serious shock or fire hazard may result along with computer malfunctions. See Grounding Instructions, page 3.

￿Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and treadmill may result.

￿Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance between the rear of the treadmill and any fixed object.

￿Keep children away from the treadmill. There are obvious pinch points and other caution areas that can cause harm.

￿Keep hands away from all moving parts.

￿Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not working properly, call your dealer.

￿Keep the cord away from heated surfaces.

￿Do not operate where aerosol spray products are being used or where oxygen is

being administered. Sparks from the motor may ignite a highly gaseous environment.

￿Never drop or insert any object into any openings.

￿Do not use outdoors.

￿To disconnect, turn all controls to the off position, remove tether cord, then remove the plug from the outlet.

￿Do not attempt to use your treadmill for any purpose other than for the purpose it is intended.

￿The pulse sensors are not medical devices. Various factors, including the user￿s movement, may affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in determining heart rate trends in general.

￿Use handrails provided; they are for your safety.

￿Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable

for use on your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.

Remove tether cord after use to prevent unauthorized treadmill operation.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

3

ET2 / ET4

Image 4
Contents ET2 ET4 Table of Contents Product Registration Register Your PurchaseImportant Safety Instructions Important Electrical Information Grounding InstructionsSafety Tether Cord Important Operation InstructionsAssembly Pack Check List ET2 / ET4 Assembly Instructions ET2 / ET4 AssemblyAssembly Instructions ET2 / ET4 Folding Instructions TransportTo Fold The Treadmill To Unfold The TreadmillGetting familiar with the control panel ET2 Console Getting StartedWindow Displays Quick StartButton Functions Preset Programs P1~P5 Rapid Speed KeysRapid Incline Keys ProgramsUser U1~U2 Speed Profile Getting started ET4 ConsoleQuick-Start Operation Pulse Grip Feature Mile TrackCalorie Display To Turn Treadmill OffTo Select a Program Programmable FeaturesUser Programs ET2 / ET4 Target Heart Rate Erratic Operation Using a Heart Rate Transmitter sold separatelySpecial Operations of Heart Rate Functions How the Heart Rate Control Program Works Selecting a Heart Rate Control ProgramGeneral Maintenance Belt AdjustmentsTreadmill Belt Tracking Adjustment To SET Treadbelt TrackingBelt/deck lubrication procedure Service Checklist Diagnosis Guide Error MessagesManufacturer’s Limited Warranty Treadmill Warranty