Spirit CT 800 owner manual Important Operation Instructions, Safety Tether Cord

Page 6

Important Operation Instructions

￿NEVER operate this treadmill without reading and completely understanding the results of any operational change you request from the computer.

￿Understand that changes in speed and incline do not occur immediately. Set your desired speed on the computer console and release the adjustment key. The computer will obey the command gradually.

￿NEVER use your treadmill during an electrical storm. Surges may occur in your household power supply that could damage treadmill components.

￿Use caution while participating in other activities while walking on your treadmill; such as watching television, reading, etc. These distractions may cause you to lose balance or stray from walking in the center of the belt; which may result in serious injury.

￿NEVER mount or dismount the treadmill while the belt is moving. SPIRIT treadmills start with at a very low speed and it is unnecessary to straddle the belt during start up. Simply standing on the belt during slow acceleration is proper after you have learned to operate the unit.

Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.). Do not use excessive pressure on console control keys. They are precision set to function properly with little finger pressure. Pushing harder is not going to make the unit go faster or slower. If you feel the buttons are not functioning properly with normal pressure contact your SPIRIT dealer.

Safety Tether Cord

A safety tether cord is provided with this unit. It is a simple magnetic design that should be used at all times. It is for your safety should you fall or move too far back on the tread-belt.

Pulling this safety tether cord will stop tread-belt movement.

To Use:

1.Place the magnet into position on the console control head. Your treadmill will not start and operate without this.

2.Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The magnet has strong enough power to minimize accidental, unexpected stopping. The clip should be attached securely to make certain it does not come off. Be familiar with its function and limitations. The treadmill will stop, depending on speed, with a one to two step coast anytime the magnet is pulled off the console. Use the red Stop / Pause switch in normal operation.

-5-

CT800

Image 6
Contents Treadmill Table of Contents Product Registration Important Safety Instructions Important Electrical Information Grounding InstructionsSafety Tether Cord Important Operation InstructionsAssembly Pack Check List Assembly Instructions Upright TubesConsole Assembly Console Assembly to Upright Tubes Operation of Your Treadmill Incline Pause/Stop/ResetQuick-Start Operation Dot Matrix Center DisplayProgrammable Features To Select and Start a Preset Program Custom Program5K Run Fitness TestBefore the test 18-25 26-35 36-45 46-55 56-65 65+ Years Old Excellent Good Target Heart Rate Using a Heart Rate Transmitter Erratic OperationHeart Rate Control Heart Rate Control programmingAuto-Pilot General Maintenance Belt AdjustmentsTreadbelt Tracking Adjustment Service Checklist Diagnosis Guide Problem SOLUTION/CAUSECalibration procedure Manufacturer’s Limited Warranty Treadmill Limited Warranty

CT 800 specifications

The Spirit CT 800 is a state-of-the-art treadmill designed to meet the demands of both serious athletes and casual fitness enthusiasts. Known for its robust construction and innovative features, the CT 800 stands out as a top choice in commercial and home gym settings.

One of the primary characteristics of the Spirit CT 800 is its powerful 3.0 HP continuous duty motor. This motor provides smooth and consistent performance, allowing users to reach high speeds without compromising stability. The incline feature, adjustable up to 15 levels, offers a dynamic workout experience that simulates outdoor running or walking conditions. This adaptability allows users to customize their workouts to meet specific fitness goals, whether it’s improving endurance, burning calories, or enhancing overall cardiovascular health.

The CT 800 is equipped with a high-definition 7.5-inch graphic display that provides real-time workout metrics. Users can easily monitor their speed, time, distance, calories burned, and heart rate through built-in pulse grips or a wireless heart rate chest strap. This integrated heart rate monitoring technology ensures that users stay within their target heart rate zones, enabling more effective and safer workouts.

Another notable feature of the Spirit CT 800 is its cushioned running surface. The treadmill is built with a durable, 20-inch by 60-inch running deck that incorporates Spirit’s advanced cushioning technology. This helps to reduce the impact on joints, providing a more comfortable running experience and minimizing the risk of injury. The sturdy frame construction enhances stability, making it suitable for users of varying weights and running styles.

For added convenience, the CT 800 features a range of pre-set workout programs designed for different fitness levels. Users can choose from programs focused on weight loss, interval training, or heart rate control. Additionally, the treadmill has the capability to connect to fitness apps and Bluetooth, allowing users to track their performance and progress over time.

In terms of design, the Spirit CT 800 combines aesthetics with functionality. Its sleek look blends well into any gym environment, and the large roller wheels make it easy to move and store. With its impressive features, performance capabilities, and user-friendly design, the Spirit CT 800 is a versatile and reliable choice for anyone looking to enhance their fitness journey.