Sole Control Remotes TT8 manual Assembly Instructions

Assembly Instructions

￿Step 1.

Remove the treadmill from the carton and lay it aside on a hard, level surface.

￿Step 2.

Connect the Computer Cable (32) with Computer Cable from the right upright tube (33).

33

32

￿Step3.

Install the Left and Right upright tubes (5,4) into the Main Frame (1). Take care installing the right upright so that the wire harness does not get pinched or cut. Only hand-tighten all the bolts in this step. The bolts will need to be completely tightened after the console and hand pulse bar are installed. Install the six 5/16￿x1/2￿ Button Head bolts (100). Put the star washer (103) on the two 3/8￿ x 2￿ Button Head Socket bolts (101) and install in the top holes.

	4
5		100	101
			103
	100		100

103

101

100

104

-7- TT8