Epic Fitness ECTL81804.2 manual Bolts, Be careful to avoid pinching the Upright Wire Harness

Page 7

2.Attach the Latch Housing (89) to the Left Upright (90) with two Latch Bolts (77). Do not overtighten the Latch

Bolts.

3.Have a second person hold the Handrails (114) near the Right and Left Uprights (90, 95). Feed the Upright Wire Harness (108) down into the Right Upright, and pull the end of the Upright Wire Harness out of the lower end of the Upright. Set the Handrail on the Uprights.

Finger tighten eight Upright Bolts (86) and four 3/8” Star Washers (88) into the Uprights (90, 95) and the Handrail (114) as shown. Do not tighten the Upright Bolts yet.

Be careful to avoid pinching the Upright Wire Harness (108).

Note: The CD Holder (31) and the Cup Holder (43) are replaceable. If these parts become dislodged from the Console Base (80), simply press them back in.

4.Connect the Upright Wire Harness (108) to the Base Wire Harness (115) in the bracket on the Base (99).

Make sure to connect the connectors properly (see the inset drawing); the connectors should slide to- gether easily and snap into place. If the connectors do not slide together easily and snap into place, turn one connector and try again to connect them. IF THE CON-

NECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.

Insert the excess Upright Wire Harness (108) and Base Wire Harness (115) up into the Right Upright (95).

2

 

 

 

89

 

90

 

 

 

 

77

 

 

 

3

 

 

 

 

31

 

 

86

 

80

 

 

 

 

 

 

 

43

 

88

 

 

 

86

 

90

 

 

 

 

114

88

86

 

 

 

 

 

95

 

 

 

108

 

4

 

 

95

 

 

99

 

 

 

 

108

 

 

 

115

7

Image 7
Contents Model No. ECTL81804.2 Serial No QUESTIONS?Table of Contents Important Precautions Page Back Before YOU BeginFor your benefit, read this manual carefully before Right SideDo not tighten the Upright Bolt yet AssemblyBolts Be careful to avoid pinching the Upright Wire HarnessSmall Screws Cylinder Wire 117 Treadmill Operation HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console HOW to USE the Manual Mode HOW to Turn on the PowerPulse/Pace Change the incline of the treadmill as desiredFollow your progress with the matrix Displays Matrix-When Distance display- If no goals were set, thisStand on Foot rails Measure your heart rate if desiredHOW to USE a Preset Program Follow your progress with the displays Select one of the custom programs HOW to Create a Custom ProgramHOW to USE a Custom Program Select a heart rate program HOW to USE a Heart Rate ProgramEnter your age and a maximum speed setting Put on the optional chest pulse sensorFollow your progress with the displays HOW to Connect Your Portable CD Player HOW to Connect Your Computer HOW to Connect Your Home StereoAudio Adapter Cable HOW to Connect Your VCRPressVCR. the Play button on your CD player or Measure your heart rate if desired Follow your progress with the matrix Displays HOW to USE a Program Directly from OUR WEB SiteFollow the on-line instructions to start Program Return to the treadmill and stand on the footHOW to Adjust the Cushioning System Information MODE/DEMO ModeOptional Chest Pulse Sensor HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Reed Switch is about 1/8. If necessary, loosen Top TroubleshootingProblem The power turns off during use Switch. Make sure that the gap between the MagnetProblem The walking belt slows when walked on Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesLimited Warranty HOW to Order Replacement PartsKey Qty Description R0805AExploded DRAWING-Model No. ECTL81804.2 125 124 117 126 127

ECTL81804.2 specifications

The Epic Fitness ECTL81804.2 is a premium treadmill designed to meet the diverse needs of fitness enthusiasts, from beginners to seasoned athletes. This state-of-the-art equipment offers an array of features that enhance the user experience while promoting effective workouts.

One of the standout features of the ECTL81804.2 is its powerful 3.0 HP motor, which ensures smooth and consistent operation even at high speeds. This motor allows users to reach speeds of up to 12 mph, making it suitable for intense running sessions or leisurely walks. The motor is complemented by an advanced cooling system, ensuring longevity and minimal maintenance.

The treadmill boasts a spacious 20-inch by 60-inch running surface, providing ample room for users to move freely during their workouts. This feature is vital for stability and comfort, reducing the risk of injuries associated with cramped spaces. Additionally, the cushioning system integrated into the treadmill absorbs impact, protecting joints and enhancing comfort during long workout sessions.

The ECTL81804.2 comes equipped with a wide array of workout programs tailored to suit varying fitness levels. With over 30 built-in workout programs, users can easily switch up their routines to keep their workouts engaging and challenging. The programs range from interval training to calorie-burning workouts, catering to diverse fitness goals.

Technologically, the ECTL81804.2 stands out with its 10-inch touchscreen display, which provides essential workout statistics such as distance, time, calories burned, and heart rate. The console is compatible with Bluetooth technology, allowing users to connect their devices for music playback or tracking workouts through fitness apps.

In terms of safety and convenience, the treadmill includes features such as an emergency stop button and a sturdy handrail, ensuring user safety during workouts. Foldable design allows for easy storage, making it an ideal solution for home gyms with limited space.

The Epic Fitness ECTL81804.2 combines innovation, durability, and user-friendly features, making it a perfect choice for those looking to elevate their fitness journey. With its robust construction and advanced technology, it promises to provide an exceptional workout experience for years to come.