Epic Fitness EPTL15605.0 manual HOW to Lower the Treadmill for USE

Page 22

HOW TO LOWER THE TREADMILL FOR USE

1.Hold the upper end of the frame with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the frame down until it is past the latch pin. Then, slowly release the latch knob.

2.Hold the frame firmly with both hands, and lower it to the floor. To decrease the possibility of injury, bend your legs and keep your back straight.

Pin

Open

Latch

 

Knob

 

Catch

 

22

Image 22
Contents Model No. EPTL15605.0 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Treadmill OperationPage Back Before YOU BeginRight Side Assembly Bolts Small Screws Cylinder Wire Treadmill Operation HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console HOW to Turn on the PowerHOW to USE the Manual Mode Distance Measure your heart rate if desired Adjust the program settings if desired HOW to USE a Preset ProgramSelect a preset program Press the Start button to start the programFollow your progress with the displays HOW to Create a Custom Program Select one of the custom programsHOW to USE a Custom Program Put on the optional chest pulse sensor HOW to USE a Heart Rate ProgramSelect a heart rate program Follow your progress with the displays HOW to Adjust the Cushioning System Information MODE/DEMO ModeOptional Chest Pulse Sensor HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Switch. Make sure that the gap between the Magnet TroubleshootingProblem The power turns off during use Reed Switch is about 1/8. If necessary, use a TopProblem The walking belt slows when walked on Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R1205A Key Qty DescriptionExploded DRAWING-Model No. EPTL15605.0 Exploded DRAWING-Model No. EPTL15605.0 Limited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT