Epic Fitness EPTL15605.0 manual Assembly

Page 6

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrench

and your own phillips screwdriver

.

For help identifying assembly hardware, see the drawings below. Note: If a part is not found in the part bags, check to see if the part has been preattached.

Upright Bolt (86)–16

Latch Bolt (77)–2

 

 

 

 

3/8” Star

 

 

 

 

 

 

 

 

Washer (88)–8

 

IMPORTANT: Do not extend the Frame (16) past the ver-

1

 

 

tical position before the console base is assembled or

 

 

 

 

 

you may damage the gas spring.

 

 

 

 

1. Identify the Right Upright (95), which has holes in the in-

 

 

 

dicated locations.

 

 

 

 

Set the Right Upright (95) near the Frame (16) as

 

 

 

shown. Insert the Upright Wire Harness (108) into the

 

16

 

lower end of the Right Upright and out of the top.

 

 

 

 

 

Place an elastic band around the Upright Wire Harness

 

 

 

(108) and the Right Upright (95) to keep the Upright Wire

 

 

 

Harness from falling into the Right Upright. Leave the

 

 

 

elastic band on until step 3 is completed.

 

 

 

Holes

 

 

 

95

 

 

 

 

 

 

 

108

 

 

 

 

Band

 

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents QUESTIONS? Model No. EPTL15605.0 Serial NoCustomer HOT Line Table of Contents Important Precautions Treadmill OperationPage Before YOU Begin BackRight Side Assembly Bolts Small Screws Cylinder Wire HOW to Plug in the Power Cord Treadmill OperationPRE-LUBRICATED Walking Belt Features of the Console HOW to Turn on the PowerHOW to USE the Manual Mode Distance Measure your heart rate if desired Adjust the program settings if desired HOW to USE a Preset ProgramSelect a preset program Press the Start button to start the programFollow your progress with the displays HOW to Create a Custom Program Select one of the custom programsHOW to USE a Custom Program HOW to USE a Heart Rate Program Put on the optional chest pulse sensorSelect a heart rate program Follow your progress with the displays Information MODE/DEMO Mode HOW to Adjust the Cushioning SystemOptional Chest Pulse Sensor HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Switch. Make sure that the gap between the Magnet TroubleshootingProblem The power turns off during use Reed Switch is about 1/8. If necessary, use a TopProblem The walking belt slows when walked on Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R1205A Key Qty DescriptionExploded DRAWING-Model No. EPTL15605.0 Exploded DRAWING-Model No. EPTL15605.0 HOW to Order Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT
Top Page Image Contents