HOW to USE a Classic Workout

Current Segment

1.Insert the key into the console.

See HOW TO TURN ON THE POWER on page 13.

2.Select a classic workout. To select a preset classic workout, press the Classic Workouts button repeatedly until “P- 1,” “P- 2,” “P- 3,” “P- 4,” “P- 5,” or “P- 6” appears in the display.

When you select a classic workout, the display will show the name of the workout, the workout time, the maximum speed setting, and a profile of the speed settings of the workout.

Each classic workout is divided into one-minute segments. One speed setting and one incline set- ting are programmed for each segment. Note: The same speed and/or incline setting may be pro- grammed for consecutive segments.

3.Press the Start button to start the workout.

A moment after you press the button, the treadmill will automatically adjust to the first speed and in- cline settings of the workout. Hold the handrails and begin walking.

During the workout, the profile will show your progress. The flashing segment of the profile represents the current segment of the workout.

The height of the flashing segment indicates the speed setting for the current segment. At the end of each segment, a series of tones will sound and the

next segment of the profile will begin to flash. If a different speed and/or incline setting is pro- grammed for the next sentence, the new speed and/or incline settings will flash in the display to alert you.

The workout will continue in this way until the last segment of the profile flashes in the display and the last segment ends. The walking belt will then slow to a stop.

If the speed or incline setting is too high or too low at any time during the workout, you can manually override the setting by pressing the Speed or Incline buttons; however, when the next segment of the workout begins, the treadmill will auto- matically adjust to the speed and incline set- tings for the next segment.

To stop the workout at any time, press the Stop button. To restart the workout, press the Start but- ton or the Speed increase button. The walking belt will begin to move at 1 mph. When the next seg- ment of the workout begins, the treadmill will auto- matically adjust to the speed and incline settings for the next segment.

4.Follow your progress with the display. See step 5 on pages 13 and 14.

5.Measure your heart rate if desired. See step 6 on page 14.

6.Turn on the fan if desired. See step 7 on page 14.

7.When you are finished exercising, remove the key from the console.

See step 8 on page 14.