Healthrider HRTL99510.0 manual HOW to Turn on the Power, HOW to USE the Manual Mode

Page 17

HOW TO TURN ON THE POWER

IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not do this, you may damage the console displays or other electrical components.

Plug in the power cord (see page 15). Next, locate the

power switch on the tread- Reset mill frame near the power

cord. Press the power switch into the reset position.

IMPORTANT: The console features a display demo mode, designed to be used if the treadmill is dis- played in a store. If the displays light as soon as you plug in the power cord and press the power switch into the reset position, the demo mode is turned on. To turn off the demo mode, hold down the Stop button for a few seconds. If the displays remain lit, see THE INFORMATION MODE on page 23 to turn off the demo mode.

Next, stand on the

 

 

foot rails of the tread-

 

Clip

mill. Find the clip at-

 

tached to the key

Key

 

and slide the clip

 

onto the waistband of

 

 

your clothes. Then,

 

 

insert the key into the

 

 

console. After a moment, the displays will light. IM-

PORTANT: In an emergency, the key can be pulled

from the console, causing the walking belt to slow

to a stop. Test the clip by carefully taking a few

steps backward; if the key is not pulled from the

console, adjust the position of the clip.

 

Note: The console can display speed and distance in either miles or kilometers. To find which unit of mea- surement is selected, see THE INFORMATION MODE on page 23. For simplicity, all instructions in this man- ual refer to miles.

HOW TO USE THE MANUAL MODE

1.Insert the key into the console.

See HOW TO TURN ON THE POWER at the left.

2.Select the manual mode.

Press the Manual button on the console. If you are not connected to iFit Live, the manual mode will be selected automatically.

3.Start the walking belt.

To start the walking belt, press the Start button, the Speed increase button, or one of the numbered Quick Speed buttons.

If you press the Start button or the Speed increase button, the walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed in- crease and decrease buttons. Each time you press one of the buttons, the speed setting will change by 0.1 mph; if you hold down the button, the speed setting will change in increments of 0.5 mph. Note: After you press the button, it may take a moment for the walking belt to reach the selected speed setting.

If you press one of the numbered Quick Speed but- tons, the walking belt will gradually change speed until it reaches the selected speed setting. To se- lect a speed setting that includes a decimal—such as 3.5 mph—press two numbered buttons in suc- cession. For example, to select a speed setting of 3.5 mph, press the 3 button and then immediately press the 5 button.

To stop the walking belt, press the Stop button. The time will begin to flash in the display. To restart the walking belt, press the Start button or the Speed increase button.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Model No. HRTL99510.0 Serial No QUESTIONS?Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Important Precautions Instructions Save TheseBefore YOU Begin Assembly See the inset drawing. Tie the wire tie Make sure that the power cord is unpluggedUpright 89. Do not press the Base Covers Into place yet 104 Bolts, and then tighten each of them Pulse Wire Pulse wires Console assembly. Be careful not to pinchWith the help of a second person, hold Do not tighten the Patch Bolts yetPage Raise the Frame 57 to the position shown PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the Console HOW to USE the Manual Mode HOW to Turn on the PowerFollow your progress with the displays Turn on the fan if desired Measure your heart rate if desiredRate, stand onContacts the foot rails Start the workout HOW to USE AN Onboard WorkoutSelect an onboard workout Select an iFit Live workout HOW to USE AN Ifit Live WorkoutFollow your progress with the displays. See on Cool Down ModeStart the workout. See on Information Mode Make sure that the audio wire is fully plugged HOW to USE the Stereo Sound SystemHOW to Fold the Treadmill HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USESymptom The power turns off during use TroubleshootingSymptom The walking belt slows when walked on Page Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyKey No. Qty Description Part ListQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty

HRTL99510.0 specifications

The Healthrider HRTL99510.0 is a versatile treadmill designed to cater to fitness enthusiasts of all levels. This model combines advanced technology with user-friendly features, making it an excellent choice for those who want to enhance their home workout experience.

One of the key highlights of the HRTL99510.0 is its SpaceSaver design, which incorporates a folding feature. This allows users to easily store the treadmill away when not in use, making it ideal for those with limited space. The treadmill is built with a sturdy frame, ensuring stability during vigorous workouts while also being lightweight enough for easy maneuvering.

The treadmill boasts a powerful 2.5 HP motor, capable of reaching speeds of up to 10 miles per hour. This allows users to engage in a variety of workout intensities, from brisk walking to high-intensity running. The adjustable incline options further enhance the workout experience, providing an additional challenge and allowing users to simulate outdoor conditions.

Another standout feature of the Healthrider HRTL99510.0 is its interactive LCD display. This large screen provides real-time feedback on important workout metrics, including time, speed, distance, calories burned, and heart rate. The built-in heart rate monitor allows users to track their cardiovascular exertion levels, ensuring they stay within their target heart rate zones.

In addition to its impressive specifications, the treadmill comes with a selection of pre-programmed workout routines designed to target various fitness goals. These programs can help users improve their endurance, speed, and overall fitness levels. The console also features speakers with an auxiliary input, allowing users to connect their devices and enjoy their favorite music while exercising.

For added comfort, the Healthrider HRTL99510.0 is equipped with a cushioned running deck that reduces impact on joints, helping to prevent injuries during workouts. The durable surface offers ample space for users to run or walk comfortably.

In summary, the Healthrider HRTL99510.0 treadmill stands out for its combination of practicality, advanced features, and user-friendly design. With its powerful motor, adjustable incline, interactive display, and pre-programmed workouts, it provides an excellent platform for achieving fitness goals from the comfort of home. Whether you're a novice or an seasoned athlete, this treadmill is designed to meet your needs and support your fitness journey.
Top Page Image Contents