Healthrider HRTL14980 manual Setting UP the Treadmill

SETTING UP THE TREADMILL

Set-up requires two people. Place the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until the treadmill is set up. No tools are required.

1.With the help of a second person, carefully raise the Uprights (82) until the Front Wheels (77) are resting on the floor as shown.

2.Remove the paper backing from the Wrench Clip (71). Press the Wrench Clip onto the Frame (92) in the indi- cated location. Press the Allen Wrench (72) into the Wrench Clip. Note: The use of the Allen Wrench is described on pages 17 and 18.

1
	82
	77
2
	92
72	71

3.Make sure that all parts are tightened before you use the treadmill. Place a mat beneath the treadmill to protect the floor or carpet. For your benefit, we recommend that you familiarize yourself with the TROUBLE-SHOOTING AND MAINTENANCE section on page 17.

6