Healthrider HRTL34306.0 manual Assembly, Make sure that the power cord is unplugged

Page 6

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

In addition to the included hex keys , assembly requires a phillips screwdriver

, an

adjustable wrench

, and needlenose pliers

.

 

Use the drawings below to identify the hardware used during assembly. Note: If a part is not in the parts bag, check to see if it has been preattached to one of the parts to be assembled. Extra hardware may be in- cluded. To avoid damaging plastic parts, do not use power tools for assembly.

Base Pad

Crossbar Screw

Console Screw/

Ground Screw

Screw (26)–6

(85)–2

Latch Screw (10)–6

(84)–1

Handrail Bolt (8)–4

Crossbar Star

 

 

 

 

Washer (7)–2

Handrail Star

 

Wheel Housing Bolt (13)–4

 

Upright Washer

 

 

 

Washer (5)–4

 

 

 

 

(14)–2

 

 

Nut (16)–4

 

 

 

Upright Bolt (2)–4

 

Upright Star

Wheel Housing

 

 

 

Washer (9)–6

Washer (32)–4

 

 

Wheel Housing

 

 

 

 

Nut (43)–4

 

 

Blue Patch Frame Bolt (1)–2

1.Make sure that the power cord is unplugged.

Have a second person hold the Base (52) in the position shown.

Attach six Base Pads (63) to the Base (52) with six Base Pad Screws (26).

1

 

26

 

 

 

 

 

26

63

 

 

 

26

 

63

 

 

 

63

 

 

 

 

52

 

26

 

 

 

 

 

26

63

 

 

 

 

 

63

 

6

 

 

 

Image 6
Contents QUESTIONS? Model No. HRTL34306.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unpluggedPage Outer side of the Frame Spacer facing Washer 9 do not tighten the Colored Patch Frame Bolt yetPage Knob Spring Collar Large Hole Pin Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual Mode Measure your heart rate if desired HOW to USE a Speed Program Select one of the four speed programsWhenkey. you are finished exercising, remove HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Maintenance and Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R0906A Qty DescriptionOrdering Replacement Parts Exploded Drawing A-Model No. HRTL34306.0 R0906A Exploded Drawing B-Model No. HRTL34306.0 R0906A Exploded Drawing C-Model No. HRTL34306.0 R0906A Exploded Drawing D-Model No. HRTL34306.0 R0906A Limited Warranty