Healthrider H10t manual Maintenance and Troubleshooting, Symptom the Walking Belt does not

Page 8

MAINTENANCE AND TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual.

1.

SYMPTOM: THE CONSOLE DOES NOT

3. SYMPTOM: THE WALKING BELT SLIPS OR IS

 

FUNCTION PROPERLY

OFF-CENTER

 

a. Replace the batteries in the console (see assem-

a. If the walking

 

bly step 6 on page 5).

belt slips

 

b. Make sure that the reed switch is properly adjust-

when walked

 

on, use the

 

ed (see assembly step 4 on page 4).

hex key to turn

 

c. Make sure that the handrail wire is plugged fully

both rear roller

 

adjustment

 

into the wire on the console (see assembly step 7

bolts clockwise,

 

on page 5).

 

1/4 of a turn. When the walking belt is correctly

 

d. The console, like most electronics, is susceptible

tightened, you should be able to lift each side of

 

the walking belt 2 to 3 in. (5 to 7 cm). Walk on the

 

to static electricity build-up caused by certain

treadmill for a few minutes. Repeat until the walk-

 

types of clothing or by the operation of the tread-

ing belt is properly tightened. Be careful to keep

 

mill. If the display is blank or gives incorrect read-

the walking belt centered.

 

ings, apply an anti-static spray to the handrail.

b. If the walking

 

Anti-static spray is available where laundry sup-

 

plies are sold.

 

belt has shift-

2. SYMPTOM: THE WALKING BELT DOES NOT

ed to the left

side, use the

 

MOVE SMOOTHLY

 

hex key to turn

 

a. If the walk-

 

the left adjust-

 

 

ment bolt

 

ing belt is

Walking Belt

clockwise, and

 

overtight-

the right adjustment bolt counterclockwise, 1/4 of

 

ened, per-

 

a turn each. Be careful not to overtighten the

 

formance

 

walking belt. Walk on the treadmill for a few min-

 

may be

 

utes. Repeat until the walking belt is centered.

 

reduced and

 

c. If the walking

 

the walking

 

 

belt may be

2–3 in.

belt has shift-

 

permanently

ed to the right

 

damaged.

Bolts

side, use the

 

Using the

hex key to turn

 

hex key,

 

the left adjust-

 

turn both rear roller adjustment bolts counter-

ment bolt coun-

 

clockwise 1/4 of a turn. When the tension of the

terclockwise,

 

walking belt is correct, you should be able to lift

and the right adjustment bolt clockwise, 1/4 of a

 

each side of the walking belt 2 to 3 in. (5 to 7

turn each. Be careful not to overtighten the walk-

 

cm). Walk on the treadmill for a few minutes.

ing belt. Walk on the treadmill for a few minutes.

 

Repeat until the walking belt is properly tightened.

Repeat until the walking belt is centered.

 

Be careful to keep the walking belt centered.

 

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents QUESTIONS? Model No. HRTL01209.0 Serial NoTable of Contents Important PrecautionsBefore YOU Begin Assembly Reed Switch so that there is a 1/8 in mm gapBetween the Reed Switch and the Magnet. Then Do not disposeTab Track your progress with the six modes. When the console is Treadmill OperationSTEP-BY-STEP Console Operation Turn on the consoleIncline Adjustment As far as itWill go Lowering the Treadmill for USEMove Smoothly Maintenance and TroubleshootingSymptom the Walking Belt does not HOW to Measure Your Heart Rate Exercise GuidelinesExercise Intensity Workout GuidelinesPart LIST-Model No. HRTL01209.0 Qty Description Key No. QtyR1209A Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty

H10t specifications

The Healthrider H10t is a versatile treadmill designed for both beginners and experienced fitness enthusiasts. With its robust build and user-friendly features, it offers an effective way to engage in cardiovascular exercise from the comfort of home. This treadmill stands out due to its combination of reliability, cutting-edge technology, and innovative design aimed at enhancing the user experience.

One of the key features of the H10t is its powerful motor. Equipped with a 2.5 HP motor, it provides sufficient power for intense workouts while delivering smooth performance across various speeds. The treadmill supports a speed range of 0 to 10 mph, allowing users to adapt their workouts according to their individual fitness levels.

Another major characteristic of the Healthrider H10t is its adjustable incline. With the ability to incline up to 10%, users can simulate hill workouts, which are effective for building strength and boosting calorie burn. The simple, one-touch controls make it easy to switch between different incline levels, ensuring a seamless workout experience.

The H10t features a spacious running surface measuring 20 inches in width and 55 inches in length, providing ample space for users to move comfortably. This added space is essential for ensuring safety and stability during vigorous activity. Furthermore, the treadmill is equipped with shock absorption technology, which minimizes impact on joints, making it an excellent choice for those who are concerned about injury.

For tracking fitness progress, the Healthrider H10t comes with an easy-to-read LCD display that provides essential metrics, including time, speed, distance, calories burned, and heart rate monitoring. The built-in pulse sensors allow users to keep track of their heart rate, ensuring they stay within their target zones for effective training.

Additionally, the treadmill includes a selection of pre-set workout programs that cater to various fitness goals. Whether users aim to lose weight, improve endurance, or increase speed, there is a program tailored to meet those objectives. Users can also customize their workouts and save their preferences for future sessions.

The Healthrider H10t is designed with user convenience in mind. It features built-in speakers and an audio input jack, allowing users to listen to their favorite music while exercising. Additionally, the folding design facilitates easy storage, making it an ideal solution for those with limited space.

In summary, the Healthrider H10t is a well-rounded treadmill that combines essential features with advanced technology. Its powerful motor, adjustable incline, spacious running surface, and user-friendly display make it suitable for a wide range of fitness enthusiasts. Whether you are beginning your fitness journey or looking to enhance your current routine, the H10t offers the right tools to help you achieve your health goals.
Top Page Image Contents