JVC UX-M3R manual Getting Started, Unpacking Connections, Connect the speakers

Getting Started

Continued

Unpacking Connections

After unpacking, check to be sure that you have all the following items.

The number in the parentheses following each item name indicates the supplied quantity.

•Remote control (1)

•Batteries (R03 (UM-4)/AAA (24F)) for remote control (2)

•AM loop antenna (1)

If any is missing, consult your dealer immediately.

Putting the Batteries into the Remote Control

Insert 2 batteries — R03 (UM-4)/AAA (24F) — into the battery compartment of the remote control, complying with the + and – polarity markings inside the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same time.

1

R03(UM-4)/

AAA(24F)

2

3

•DO NOT use an old battery together with a new one.

•DO NOT use different types of batteries together.

•DO NOT expose batteries to heat or flame.

•DO NOT leave the batteries in the battery compartment when you are not going to use the remote control for an extended period of time; otherwise, the remote control may be damaged by battery leakage.

•DO NOT connect any equipment to the unit while the

unit is powered.

•DO NOT plug in any equipment until all connections are completed.

2	3	FM
		ANTENNA
		AM
		LOOP
RIGHT		LEFT
		L
		R
		1
		4

1 Connect the speakers.

Connect the right speaker to the “R” terminals, with the red wire to + and the black wire to –.

Connect the left speaker to the “L” terminals in the same way.

Clip the stripped portion of each speaker wire as shown in the illustration.

– 6 –