Playing Back CDs
This unit can play back audio CDs.
Loading a Disc
Program Play
You can arrange the order in which the tracks are played before you start playing. You can program up to 60 tracks.
1 In stop mode, press | PROGRAM |
PROGRAM. |
|
1 | Press CD/RANDOM to |
| RANDOM | ||
| CD | ||||
| select CD mode. |
| |||
|
|
|
|
| |
2 | Press 0 OPEN/CLOSE. |
|
|
| OPEN |
|
|
| |||
|
|
| |||
| The disc tray slides out. |
|
|
| |
|
|
|
| /CLOSE |
The PROGRAM indicator starts blinking.
2 Press 4 or ¢ repeatedly to select the desired track.
SEARCH/TUNING
3 Load a disc with the label side facing up.
4 Press 0 OPEN/CLOSE to |
| OPEN |
| ||
close the disc compartment. |
| |
| /CLOSE | |
|
| |
|
|
|
|
|
|
The total number of tracks and the playing time of the disc appear on the display.
Basic CD Operations
The current program number starts blinking.
3 Press PROGRAM to store | PROGRAM |
| |
the selected track. |
|
“00” and the next program number appear on the display.
4 Repeat steps 2 and 3 to store other tracks.
•You cannot program more than 60 tracks. If you attempt to do it, “FULL” will flash on the display.
To review the programed sequence
PROGRAM
Press PROGRAM repeatedly in stop mode. The program number and track number are displayed in succession.
To modify the program
Press PROGRAM repeatedly to select | PROGRAM | ||
the program number with which you |
|
|
|
want to change the track, then repeat |
|
|
|
1 Press 6 to start playback.
The 3 indicator lights up and the track number and elapsed playing time of the current track appear on the display.
2 To stop playback, press 7.
To interrupt playback
Press 6.
The 3 indicator and the playing time starts blinking.
To resume playback, press 6 again.
To select a desired track
PLAY/PAUSE
STOP/CLEAR
PLAY/PAUSE
SEARCH/TUNING
steps 2 and 3 above. |
To play the programed tracks | PLAY/PAUSE |
Press 6. |
|
•During program play, you can press 4 or ¢ to select the desired track in the program.
If you press REPEAT during program play The current track or all programed tracks are played repeatedly.
To clear the program | STOP/CLEAR |
Press 7 in stop mode.
Press 4 or ¢ repeatedly until the desired track appears on the display.
To search for a particular point during playback
Press and hold 4 or ¢ to locate the | SEARCH/TUNING | |
desired point. |
|
|
|
|
The PROGRAM indicator disappears from the display.
•The stored program is cleared when the CD compartment is opened.
– 13 –