Smooth Fitness CE 2.1 user manual 105

9

CE 2.1 ELLIPTICAL TRAINER

ASSEMBLY

STEP 2:

First make sure to connect the Wire Harness - Upper (109) with Wire Harness - Middle (103) and Hand Pulse Sensor Wire – Upper (110) with Hand Pulse Sensor Wire – Middle (108) as shown below.

Attach the Computer (1) to the Front Upright Frame (2) using four M6 x 20mm Bolts (105).

NOTE: Make sure all wires are recessed into the Console Housing, do not trap or pinch any of the wires.

1

105

2

Visit us at: www.smoothfitness.com