HANDLEBAR
To secure the handlebar to the upright post, use two bolts and a bolt a washer and a nut.
METER
Pop open the battery cover at the back of the meter to assemble battery. Connect the meter wire to meter.
Loosen the screws at the back of the meter enough to fit them into the slot on the steel plate at the top of the upright post. Slide the screws to the bottom end of the slot before tightening screws to secure the meter.
RESISTANCE KNOB
Make sure the display window shows 8 on the knob. Pull out the connector box from upright post.
G B
O W N E R ' S M A N U A L • F 2 O O
Thread A diagonally into the connector box and fit A into B from behind. Then pull C up before pushing wedge D into gap E. Make sure D is tightly inserted into E.
SEAT AND SEAT POST
Secure the seat to the seat post with three washers and three nylon nuts.
Slide the seat post into the frame and secure the the locking knob.
FOOT PEDALS
Fasten the right pedal to the right pedal crank turning clockwise and left pedal to the left pedal crank turning
The pedals and pedal straps are marked R for right and L for left.
3