Sears 831.159370 user manual Make sure the Leg Press Plate 87 is oriented as shown

Page 18

44.Attach the Adjustment Tube (88) to the Leg Press Arm (89) with the Small Lock Pin (90).

Make sure the Leg Press Plate (87) is oriented as shown.

44
87
	88
90	89

45.Remove the decals from the decal sheets (not shown) and apply them to the home gym system in the loca- tions shown in the illustration below.

45

HIGH PULLEY

BUTTERFLY

LEG

PRESS

ARM

PRESS

LEG EXTEN- SION/CURL

SERIAL NUMBER DECAL

LOW PULLEY

18

Image 18

Contents Model No Serial No SEARS, Roebuck and CO. Hoffman ESTATES, ILTable of Contents Important PrecautionsBefore You Begin Assembly Making Things Easier for YourselfFrame Assembly Do not tighten the Nylon Locknuts yetDo not tighten the Nylon Locknuts yet Page Arm Assembly Tighten all Nylon Locknuts used in steps 4 throughButterfly Arm Assembly Make sure the Long Cable Traps 50 are posi- tioned as shownCable Assembly Make sure the Cable Trap 66 is positioned as shown Make sure the Cable Trap is positioned as shown Make sure the Long Cable Trap is positioned as shown Make sure the Cable Trap 66 is positioned as shown Seat Assembly Locate and open the parts bag labeled Seat AssemblyPage Miscellaneous Assembly Leg Press AssemblyMake sure the Leg Press Plate 87 is oriented as shown Short Cable Cable DiagramLong Cable Cable ID Chart Medium CableAdjustment Changing the Weight SettingAttaching the Leg Lever to the Low Pulley Station Weight Resistance Chart Trouble-shooting and Maintenance Tightening the CablesPage X 4 1/2 Bolt Part List-Model No Qty DescriptionExploded Drawing-Model No R0697A Ordering Replacement Parts Full 90 Day Warranty