Sears 831.159370 user manual Butterfly Arm Assembly

Page 9

14.Press a 1 3/4” Square Inner Cap (44) into the lower end of each Press Arm (46).

Press a 1” Round Inner Cap (49) into the side of each Press Arm.

Attach each Press Arm to the Press Frame (17) with two 5/16” x 2 1/2” Bolts (22) and two 5/16” Nylon Locknuts (3).

15.Butterfly Arm Assembly

Attach a “V”-Pulley (6) and a Long Cable Trap (50) to each Butterfly Arm (47) and (48) with a 3/8” x 2 1/2” Bolt (7) and a 3/8” Nylon Locknut (21).

Make sure the Long Cable Traps (50) are posi- tioned as shown.

Identify the Right Arm (48) and the Left Arm (47) by imagining yourself sitting on the seat. Note the posi- tion of the welded bracket (A) on each Arm. Arm identification is very important for the next step.

14
	17
	22
		3
46
49
44
15
	7	50
		50
		6
50
6		A
A		A
A
		47
		21
	48

9

Image 9

Contents SEARS, Roebuck and CO. Hoffman ESTATES, IL Model No Serial NoImportant Precautions Table of ContentsBefore You Begin Making Things Easier for Yourself AssemblyDo not tighten the Nylon Locknuts yet Frame AssemblyDo not tighten the Nylon Locknuts yet Page Tighten all Nylon Locknuts used in steps 4 through Arm AssemblyMake sure the Long Cable Traps 50 are posi- tioned as shown Butterfly Arm AssemblyCable Assembly Make sure the Cable Trap 66 is positioned as shown Make sure the Cable Trap is positioned as shown Make sure the Long Cable Trap is positioned as shown Make sure the Cable Trap 66 is positioned as shown Locate and open the parts bag labeled Seat Assembly Seat AssemblyPage Leg Press Assembly Miscellaneous AssemblyMake sure the Leg Press Plate 87 is oriented as shown Long Cable Cable ID Chart Cable DiagramShort Cable Medium CableChanging the Weight Setting AdjustmentAttaching the Leg Lever to the Low Pulley Station Weight Resistance Chart Tightening the Cables Trouble-shooting and MaintenancePage X 4 1/2 Bolt Qty Description Part List-Model NoExploded Drawing-Model No R0697A Full 90 Day Warranty Ordering Replacement Parts