6.Attach the Seat (5) to the Seat Frame (6) with four M6 x 16mm Screws (38).
7.Press two 40mm x 60mm Inner Caps (46) into the Leg Lever (8). Press two 60mm Round Bushings (18) into the Leg Lever. Press a 48mm Round Inner Cap (19) into the weight tube. Slide the Weight Tube Spacer (20) onto the weight tube. Make sure the slot fits around the Leg
Lever.
8.Attach a set of Pads (16, 44) to a Pad Brace (17)
with four M6 x 16mm Screws (38). | Make sure |
the Pads and the Pad Brace are oriented as |
|
shown. Repeat with the other set of Pads and |
|
the other Pad Brace. |
|
Attach a Pad Brace (17) to the Leg Lever (8) with two M10 x 80mm Carriage Bolts (39), two M10 Washers (33), and two M10 Nylon Locknuts (32).
Attach the other Pad Brace to the Leg Lever
(8) in the same manner.
9.Press the 50mm Square Bushing (22) into the Seat Extension (13). Press the 50mm Square Outer Cap (21) onto the Seat Extension.
Lubricate an M12 x 75mm Button Head Bolt (36) with grease. Attach the Leg Lever (8) to the Seat Extension (13) with the Bolt and an M12 Nylon Locknut (47). Do not overtighten the Locknut; the Leg Lever must be able to pivot easily.
6 |
|
|
|
|
| 5 |
|
|
|
|
|
| 6 |
|
|
|
|
| 38 |
|
|
| 38 |
|
7 |
|
|
| 18 |
|
|
|
| |
|
|
| 8 | 18 |
|
|
|
| |
| 46 |
|
| Weight |
|
|
|
| |
|
| Slot | Tube | |
| 20 |
| ||
|
|
|
| |
|
|
| 19 | 46 |
8 |
| 39 |
|
|
|
|
| 17 | Straight |
|
|
|
| Edge |
|
|
|
| 8 |
|
| 33 |
| 33 |
|
|
|
| 32 |
| Straight | 32 | 44 | |
|
| Edge | ||
|
|
|
| |
|
|
|
| 16 |
|
| 38 | 39 | 17 |
|
|
| 38 | |
9 |
|
|
| 22 |
|
|
|
| |
|
|
|
| 13 |
|
|
| 47 |
|
|
| 8 |
|
|
|
|
|
| 36 |
|
|
|
| 21 |
8