2.Hold the Upright (2) near the front of the Frame (1) as shown. Connect the Extension Wire (66) to the Wire Harness (22). Attach the Upright to the Frame with four M6 x 12.7mm Button Screws (62), four M6 Split Washers (57), and four M6 Flat Washers (67).
Slide the Collar (48) onto the Upright (2). Align the slit in the Collar with the seam between the Side Shields (4, 5). Snap the Collar into the Side Shields.
3.The Console (3) requires four “D” batteries (not included). Alkaline batteries are recommended. To install batteries, turn the Console facedown and remove the battery cover, as shown in the inset drawing. Insert four batteries into the Console. Make sure that the negative ends of the batteries (marked
Hold the Console (3) near the Upright (2). Connect the Extension Wire (66) to the console wire. Attach the Console to the Upright with four Console Washers (45) and four Console Screws (63).
Snap the bookrack onto the Console (3) in the indicat- ed location.
4.Attach the Handlebars (11) to the Seat Carriage (6) with four M6 x 35mm Bolts (70) and four M6 Nylon Locknuts (71).
2 |
| 62 |
|
|
|
| |
|
| 57 |
|
|
| 67 |
|
|
| 2 |
|
|
| 57 | 48 |
|
| 67 | |
|
|
| |
|
| 1 |
|
|
| 66 | 5 |
|
| 4 | |
|
| 22 |
|
|
| Seam |
|
3 |
|
|
|
|
| Bookrack |
|
|
| Console |
|
|
| Wire |
|
|
| 66 |
|
|
| 45 | 3 |
| 63 |
| |
|
|
| |
|
| Battery Cover | |
|
| 2 |
|
45 |
| 45 |
|
|
|
| |
| 63 | 3 |
|
|
|
| |
4 |
|
|
|
|
| 11 |
|
|
| 6 |
|
| 11 | 71 |
|
|
|
| |
|
| 70 | |
5