PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw- ing is the key number of the part, from the PART LIST on page 14 of this manual. Note: Some small parts may have been
M4 x 16mm Screw (41) | M6 x 16mm Screw (38) |
|
| M10 x 63mm Button Head Bolt (37) | |
|
| |
|
| M12 x 77mm Button Head Bolt (36) |
M10 Washer (33) | M12 Washer (40) |
|
|
| M10 x 80mm Carriage Bolt (39) |
| M5 x 11mm |
|
M10 Nylon Locknut (32) | Screw (51) |
|
|
| M12 x 87mm Button Head Bolt (34) |
M12 Nylon Lockut (47) |
| M10 x 115mm Carriage Bolt (35) |
5