NordicTrack NTEL7506.0 user manual Attach the Right Upper Body Arm 23 Same way

7. Attach the Left Upper Body Arm (22) to the Left	7
Upper Body Leg (24) with three M8 x 14mm
		23
Button Screws (84) and three M8 Split
Washers (97).
Attach the Right Upper Body Arm (23) in the
same way.		22
		97
		84
		97
		24
8. Hold the Left Rear Upper Body Cover (26) and	8
the Left Front Upper Body Cover (27) around
the Left Upper Body Leg (24). Attach the Upper
Body Covers with five M4 x 16mm Round Head
Screws (80).		29
Attach the Right Rear Upper Body Cover (28)		80
	80
and the Right Front Upper Body Cover (29)		28
in the same way.
		27
		26
		24
		80
9. The Console (11) can be operated with four 1.5V	9
“D” batteries (not included); alkaline batteries are
recommended. Remove the battery cover and
insert four batteries into the Console. Make sure
that the batteries are oriented as shown at the		11
right. Then, reattach the battery cover.
The Console (11) can also be operated with a
regulated 6-volt DC 2-amp power supply (not
included). To purchase a power supply, call
the toll-free telephone number on the front
cover of this manual. To avoid damaging the		Batteries
console, use only a manufacturer-supplied
power supply. Plug one end of the power sup-		Battery
ply into the jack on the console; plug the other		Cover
end into an outlet installed in accordance with
all local codes and ordinances.
	8