10.While another person holds the Console (11) near the Upright (10), connect the console wire harness to the Upper Wire Harness (65).
Attach the Console (11) to the Upright (10) with four M4 x 16mm Screws (78). Avoid pinching the wire harnesses during this step.
10
11
Console Wire
Harness
11. Orient a Link Arm (30) as shown. Attach the |
Left Pedal (34) to the Link Arm with three |
M8 x 45mm Button Screws (90), three M8 Split |
Washers (97), and three M8 x 23mm x 2mm |
Washers (96). |
Attach a Pedal Arm Cover (39) to the Link |
Arm (30) with an M4 x 16mm Round Head |
78
11
65
10
Avoid pinching the
wire harnesses during this step
34
80
39
Screw (80). |
Repeat this step for the Right Pedal (not |
shown) and the other Link Arm (not shown). |
96 
97
96 30
97
90
9