JVC CA-HXZ1R manual Connecting Speakers

Page 48

English

AM antenna

	1
	2
	ANTENNA	Vinyl-covered wire
	ANTENNA	(not supplied)
		(not supplied)
	AM EXT
	AM LOOP
	FM 75
	COAXIAL
	3
	AM loop antenna
	(supplied)

1If cords are covered with insulation, twist the core of the cord at the end of each cord, then remove the insulation.

Connecting Speakers

1
2		3
Speaker cords		Speaker cords
(black/blue)		(black/blue)
RIGHT	LEFT
		MAIN
		SPEAKERS
		SUBWOOFERS
CAUTION: SPEAKER IMPEDANCE 6		16
Speaker cords
(black/red)
From right	From left
subwoofer	subwoofer
From main		From main
right speaker		left speaker

2Connect the AM loop antenna to the AM LOOP terminals as illustrated.

3Turn the AM loop antenna until you have the best reception.

To connect an outdoor AM antenna

When reception is poor, connect a single vinyl-covered wire to the AM EXT terminal and extend it horizontally. The AM loop antenna must remain connected.

For better reception of both FM and AM

•Make sure the antenna conductors do not touch any other terminals and connecting cords.

•Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.

1If cords are covered with insulation, twist the core of the cord at the end of each cord, then remove the insulation.

2Insert the end of the speaker cord into the

terminal as illustrated.

Match the same polarity: (+) to (+) and (–) to (–).

3Close the speaker terminals.

IMPORTANT: Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

• DO NOT connect more than one speaker to each speaker terminal.

•DO NOT push or pull the speakers as this will damage the foot spacers at the bottom of the speakers.

– 7 –

Image 48

Contents CA-HXZ1R Important for Laser Products Above ALL Precautions IntroductionAbout This Manual Contents Location of the Buttons and Controls Front PanelFront Panel Display Window Remote Control For CA-HXZ1RFor CA-HXZ1 Supplied Accessories Connecting Antennas Putting the Batteries into the Remote Control FM antennaGetting Started To connect an outdoor FM antennaConnecting Speakers AM antennaTo connect an outdoor AM antenna Close the speaker terminalsConnecting Other Equipment Canceling the DemonstrationTo connect an analog component To start the demonstration manuallyTurning On or Off the Power Setting the ClockSaving the Power Consumption while on Standby -Ecology Mode Common OperationsAdjusting the Volume To turn down the volume level temporarilySelecting the Sources Reinforcing the Bass SoundCreating Your Own Sound Mode-User Mode To use your own sound modeTurning On or Off the Key-touch Tone Tuning in to a Station Tuning in to a Preset StationPresetting Stations To change the FM reception modePress Display Mode Searching for Programs by PTY Codes PTY SearchChanging the RDS Information Press PTY SearchSwitching to a Program Type of Your Choice Temporarily Wait for about 5 seconds after specifying the data typeTo activate the Enhanced Other Networks function More about the Enhanced Other Networks functionWhen playing a CD-R or CD-RW Playing Back CDs CD/CD-R/CD-RWLoading CDs About the CD ready lampsBasic CD Operations Programming the Playing Order of the Tracks -Program Play To check the program contents Playing at Random-Random PlayTo modify the program To cancel the prohibition and unlock the CDs, press 0for Repeating Tracks or CDs-Repeat PlayProhibiting Disc Ejection-Tray Lock If you try to eject CDs while Tray Lock is in usedPlaying Back Tapes Playing Back a TapeLocating the Beginning of a Song-Music Scan To record on both sides-Reverse Mode RecordingRecording on a Tape To keep the best recording and playback sound qualityCD Synchronized Recording CD Direct RecordingPress CD REC Start Reverse Mode indicator lights Up like Press EditRecord from Using the Timers Using Daily TimerHow Daily Timer actually works Daily Timer setting When selecting Tuner FM or TuneramWhen selecting 1 CD Volume levelUsing Recording Timer How Recording Timer actually worksUsing Sleep Timer Timer PriorityTo turn on or off Recording Timer after its setting is done How Sleep Timer actually worksAdditional Information Description of the PTY codesMaintenance Cleaning the unitGeneral Notes Handling discsTroubleshooting SymptomSpecifications CA-HXZ1R0302MWMMDWJEM CA-HXZ1 Standby/on button English Español Português Front view Vista frontal English Español English Using the Microphones Maintenance Troubleshooting SpecificationsLocation of the Buttons and Controls Tape 23button 10, 18 Remote Control Attach the FM antenna to the FM 75 Ω Fasten it up in the position which gives youBest reception, then fix it on the wall, etc Connecting Speakers Now, you can plug the AC power cord Adjusting the Voltage SelectorTurning On or Off the Power Setting the Clock To turn on the unit, pressSound Mode CD3 Ready Setting the AM Tuner Interval Spacing Press while holding downTo the previously received station either Playing Back CDs CD/CD-R/CD-RW Turn ¢ before or during playback Activate the Program Play mode Activate the Random Play mode If you try to eject CDs while Tray Lock is in use To use Reverse Mode, press Reverse Mode Insert a cassette with the exposed partTape down Mode Press 0EJECT to insert a recordable cassette With the exposed part of the tape downStart Singing along-Karaoke Vocal MaskingMicrophone Mixing To apply an echo to your voiceWhen using the external component as the source to Press SET/DISPLAY to complete the Daily Timer setting Daily appears on the displayUsing Recording Timer 2100 2130 2200 General Notes Tape SP-HXZ1 Connection Conexión UFý≈ ÊËœ dOOG²K